Become a Site Supporter and Never see Ads again!

Author Topic: FR2-LE HPF location in chain?  (Read 1459 times)

0 Members and 1 Guest are viewing this topic.

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
FR2-LE HPF location in chain?
« on: February 06, 2009, 12:29:38 PM »
Anyone have an idea where the HPF is used (before A/D, before gain, after metering, etc) on the FR2-LE?
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline Mike R.

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 49
Re: FR2-LE HPF location in chain?
« Reply #1 on: February 06, 2009, 04:40:48 PM »

They're not terribly clear in the user's manual are they.

The 'correct' place would be before the mic pre so it reduces overload from wind or mic motion.  The UM says that's what it's for, but they don't specifically say it's for the mic inputs only.

AE5100
AT3032  --> MixPre-3ii
M-88TG

Offline datbrad

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 2301
  • Gender: Male
Re: FR2-LE HPF location in chain?
« Reply #2 on: February 06, 2009, 05:05:16 PM »
Page, I understand that with most of today's flash/HDD wave recorders, limiters and filters are not always fully analog in the way they were on the portable professional DAT recorders back in the day.

Often the gain control is not analog either, since active electronics are typically placed between the inputs and the gain controls.

You should email Doug Oade for a definative explanation, as he knows these units circuit layouts very well.
AKG C460B w/CK61/CK63>Luminous Monarch XLRs>SD MP-1(x2)>Luminous Monarch XLRs>PMD661(Oade WMOD)

Beyer M201>Luminous Monarch XLRs>PMD561 (Oade CMOD)

Offline balou2

  • Crippled, but still dancin'
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 4442
  • Gender: Male
  • He was a friend of mine.
    • Little Mountain Sound Archive
Re: FR2-LE HPF location in chain?
« Reply #3 on: February 07, 2009, 01:31:03 AM »
Busman might know also, since he works around those parts.
Socks are overrated.

 

RSS | Mobile
Page created in 0.055 seconds with 28 queries.
© 2002-2024 Taperssection.com
Powered by SMF