Topic: pops and cracks on JB3 recordings

[jkbyram]

has anyone else had their JB3 start introducing pops into the recording?. mine started to do that last weekend and i checked every cable and plug and they were all fine. i cleaned up the hard drive and reformatted the drive an since then i have recorded my tv in my room just to be able to listen for more noise. i did not get any. did this help anyone elses and should i do that more often?

[pfife]

has anyone else had their JB3 start introducing pops into the recording?. mine started to do that last weekend and i checked every cable and plug and they were all fine. i cleaned up the hard drive and reformatted the drive an since then i have recorded my tv in my room just to be able to listen for more noise. i did not get any. did this help anyone elses and should i do that more often?

That was what I was going to suggest you do.   Mine was freezing up, and after a reformat, its been OK.   I've had other people tell me that they have to reformat like once a week to keep it from making sounds like you are describing.  I think its an issue with age...

[jkbyram]

Is it age or a fragmented hard drive? I had recently deleted about 15 gigs off it before I recorded.

[neumannkid]

Is it age or a fragmented hard drive? I had recently deleted about 15 gigs off it before I recorded.

It was because your HD was fragmented, not age

[pfife]

Is it age or a fragmented hard drive? I had recently deleted about 15 gigs off it before I recorded.

It was because your HD was fragmented, not age

Yeah, age wasn't the right word.... but, what happened with mine, is that it went for a long time before I started having any problems... now, I have to reformat regularly.  I attribute that to age, but that's just me.

[sygdwm]

id still try a known good/new optical cable as well. just in case.

[jkbyram]

I taped the TV without pops so I guess I have a good cable. I am taping for beers tonight so I will know then.

[Ed.]

get everything off of the drive, and then do a disc cleanup and a reformat.  you'll have to go in and reset all of your original settings, but the pops and clicks won't be there on your next recording.

i do this before every show (or when its convenient) and don't have the problem anymore.  however, if i let it go for awhile without one, the pops and clicks come back.

[jkbyram]

get everything off of the drive, and then do a disc cleanup and a reformat.  you'll have to go in and reset all of your original settings, but the pops and clicks won't be there on your next recording.

this is what i did before taping judge judy and judge joe brown from my tv. no pops during judy!!

[Ed.]

hahahaha +t

[sygdwm]

this is what i did before taping judge judy and judge joe brown from my tv. no pops during judy!!

plus tee for having to go back and listen to that crap afterwards.

[rowjimmy]

+t for this thread in general. haven't had this trouble but it's a good heads up as i get my gear together for vegoose.

[spyder9]

has anyone else had their JB3 start introducing pops into the recording?. mine started to do that last weekend and i checked every cable and plug and they were all fine. i cleaned up the hard drive and reformatted the drive an since then i have recorded my tv in my room just to be able to listen for more noise. i did not get any. did this help anyone elses and should i do that more often?

I think its the optical-In on the JB3 may have sh&t the bed.  I've already blown 3 of them so far.  All fixable by Creative.

[Brian Skalinder]

I think its the optical-In on the JB3 may have sh&t the bed.  I've already blown 3 of them so far.

What the heck are you doing to your JB3s, Dan?   

FWIW, and this is for everyone, not just Dan - I recommend travelling with the optical cable NOT attached to the JB3.  Leaving it in, even the right-angle cables, will stress the connector and contribute to optical component failure.  Just like with portable DAT recorders, don't wanna travel with coax or 7-pin cables stuck in those, either.

[spyder9]

I think its the optical-In on the JB3 may have sh&t the bed.  I've already blown 3 of them so far.

What the heck are you doing to your JB3s, Dan?   

FWIW, and this is for everyone, not just Dan - I recommend travelling with the optical cable NOT attached to the JB3.  Leaving it in, even the right-angle cables, will stress the connector and contribute to optical component failure.  Just like with portable DAT recorders, don't wanna travel with coax or 7-pin cables stuck in those, either.

Brian, I never leave the toslink attached.  Ever.  I was at a show a week ago, inserted the cable gently , as I usually do, and felt abnormal resistance.  Bang!  I got clicking in my recording.  I've had no issues until September of this year.  All 3 times, it had to do with the Kimber cable.  I'm gonna swap out Toslinks and use my old 3 foot w/ fixed right angles.  See what results I get.  Could be the RA on the Kimber cable is shot.