Taperssection.com

Gear / Technical Help => Recording Gear => Topic started by: Nick in Edinboro on June 25, 2003, 01:53:36 PM

Title: JB3 question.
Post by: Nick in Edinboro on June 25, 2003, 01:53:36 PM

My JB3 should be here tomorrow.  Curious to those users out there now, is there any firmware I *must* get before heading out to record?  Do they generally come relatively up to date from Creative?

Anything else I should know, feel free to clue me in :D  It'll be fed from a UA-5.

Title: Re:JB3 question.
Post by: DaryanLenz on June 25, 2003, 02:44:43 PM

Nope, you should be just about good to go.  I would reccomend updating the firmware though as soon as you get it, as the original releases sucked!

Daryan

Title: Re:JB3 question.
Post by: Nick in Edinboro on June 25, 2003, 02:52:28 PM

I've done some research over at http://www.nomadness.net and it seems as if the highest you want to go (to be reliable) is firmware version 1.20.06

If you go past that firmware wise I guess people are having trouble with the unit locking up or not booting with anything past that?!  ::)  

Title: Re:JB3 question.
Post by: bush on June 28, 2003, 07:51:27 PM

i have firmware version 1.32.02p, and have had this sine the day i got it.

i have had no problems whatsoever.

Title: Re:JB3 question.
Post by: wrangler_n_space on June 30, 2003, 09:02:00 AM

Quote

i have firmware version 1.32.02p, and have had this sine the day i got it.

i have had no problems whatsoever.

Same here.

Title: Re:JB3 question.
Post by: tadjblack on July 01, 2003, 08:18:11 PM

ditto

Title: Re:JB3 question.
Post by: Lee on July 01, 2003, 09:58:22 PM

be careful with upgrading firmware too much... you can't downgrade

Title: Re:JB3 question.
Post by: F.O.Bean on July 07, 2003, 01:21:57 AM

if my dmic-20 is set at 48k via internal crystal, could i even run a jb3 after the dmic cause its not at 44.1k???

thanks,
  bean

Title: Re:JB3 question.
Post by: tadjblack on July 07, 2003, 01:25:18 AM

The JB3 can record at 48K- but I think thats as high as she goes

Title: Re:JB3 question.
Post by: F.O.Bean on July 07, 2003, 01:27:08 AM

+T tad, thanks for the ultra quick reply..... 8)

Title: Re:JB3 question.
Post by: tadjblack on July 07, 2003, 01:46:27 AM

anytime :happy:

Title: Re:JB3 question.
Post by: F.O.Bean on July 07, 2003, 01:58:39 AM

Quote from: tadjblack on July 07, 2003, 01:46:27 AM

anytime :happy:

SUITE, thanks man...just inquiring, ya know..... 8) ;) :cheers: :clapping: :happy: