Become a Site Supporter and Never see Ads again!

Author Topic: Marantz 671 in the field...  (Read 95585 times)

0 Members and 1 Guest are viewing this topic.

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10260
  • Gender: Male
  • I thought I heard.......
Re: Marantz 671 in the field...
« Reply #120 on: November 08, 2005, 07:00:28 AM »
Has there been any talk of make a flavor for the 671?  i.e. w,t,or p mods?  The ACM is suppose to sound T ish?

For your MBHOs, I would go with an Oade warm UA-5 and connect via spdif.

 I haven't heard plans for other mods besides the T-mod.  Probably because he has 2 boxes to work on at once (660 and 671) and the T-mod was the most popular mod for the UA5.  Not speaking for Doug, but just an educated guess.


I think he just found some new parts he really likes, and that flavor is "Tmodish"
:)

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz 671 in the field...
« Reply #121 on: November 08, 2005, 02:11:36 PM »
tested 8 NiMH batteries w/ phantom on and got ~5hrs. this was w/ the unit set to "record pause", cause i dont have enough media for it to record that long. so. im not sure if this was an accurate test w/o the unit actually "writing". also i recorded the tv 140's>671 in mp3 format for a few minutes. the transer from 671>pc via usb was very easy. just showed up as another drive - copy & paste. more to come...
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10260
  • Gender: Male
  • I thought I heard.......
Re: Marantz 671 in the field...
« Reply #122 on: November 08, 2005, 02:29:05 PM »
i'm about to run a set of 1700mAh AAs through the works right now.
will report back...

Offline Kindguy

  • Team Bama
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 6390
  • Gender: Male
Re: Marantz 671 in the field...
« Reply #123 on: November 08, 2005, 07:57:17 PM »
Ordering mine tomorrow. Do y'all really think the AD in this box is close to a mod SBM-1 or ad500?
TDS!

DPA 4023> aeta PSP-2> Apogee Mini Me > R-44

http://www.basicallyfrightened.com/

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10811
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: Marantz 671 in the field...
« Reply #124 on: November 08, 2005, 08:17:14 PM »
Ordering mine tomorrow. Do y'all really think the AD in this box is close to a mod SBM-1 or ad500?

Good question.
I'm trying mine stock this weekend. We'll see.
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz 671 in the field...
« Reply #125 on: November 08, 2005, 09:58:26 PM »
Ordering mine tomorrow. Do y'all really think the AD in this box is close to a mod SBM-1 or ad500?

Good question.
I'm trying mine stock this weekend. We'll see.

i got a show coming up thurs nite. IF my cf card comes in by then, i will test 140>148>671@24/48. i dont know if its as good as those a/d's, but in my non-professional testing, it sounds really good fwiw. will report back.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline Kindguy

  • Team Bama
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 6390
  • Gender: Male
Re: Marantz 671 in the field...
« Reply #126 on: November 08, 2005, 10:41:53 PM »
Ordering mine tomorrow. Do y'all really think the AD in this box is close to a mod SBM-1 or ad500?

Good question.
I'm trying mine stock this weekend. We'll see.

i got a show coming up thurs nite. IF my cf card comes in by then, i will test 140>148>671@24/48. i dont know if its as good as those a/d's, but in my non-professional testing, it sounds really good fwiw. will report back.

Good to hear. Also interested to hear what you think after getting it out to a show. I'm prob going to run a comp 148>ad500>671 1st set. 148>671 2nd set. First things first, gotta get it in my hands  >:D.

Totally new to 24b recording. Have to say I'm somewhat intimidated.
TDS!

DPA 4023> aeta PSP-2> Apogee Mini Me > R-44

http://www.basicallyfrightened.com/

Offline TenoRichards

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 169
  • Gender: Male
  • Resident Taper/Audiophile Wannabe
    • Tenor
Re: Marantz 671 in the field...
« Reply #127 on: November 09, 2005, 06:16:45 AM »
Anyone see a way to turn off the speaker completely? I'm about to tape tonite and don't want my taper to accidently bump headphone volume knob and start b'casting!

TIA
Andrew
dpa 4060's>BBox>acm modded pmd671 or Edirol r-09
www.tenorrichards.com

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10260
  • Gender: Male
  • I thought I heard.......
Re: Marantz 671 in the field...
« Reply #128 on: November 09, 2005, 06:54:21 AM »
in the "output" section, you can select the various analog outputs, and the speaker is one of them I believe.

as for how good the a/d section is.
well, its good enough. 
:)
for me any way.  a/d is my least critical componant.  if the signal being fed to the a/d is a good one, then its all good.
i have faith that the ACM will provide a great signal.  right now, my 248 is providing signal, and the recordings thus far have been remarkable.

Offline TenoRichards

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 169
  • Gender: Male
  • Resident Taper/Audiophile Wannabe
    • Tenor
Re: Marantz 671 in the field...
« Reply #129 on: November 09, 2005, 08:35:59 AM »
fyi: it takes me ~4 mins to transfer a 2gb file from the 671 onto my laptop via a usb2/pcmcia adapter. I tried using a cf pcmcia adapter (the kind that actually HOLDS the cd card) and it took 18 minutes for ONE gb. Again, I'm going usb out on the 671 into my dell 8200 w/ xp SP2, via the pcmcia slot which HAS a usb 2 connection. I don't know what they are called....

4 mins ain't bad. I think I'll hold off on the OTG drive for now.

Tonites taping venture: http://www.staatsoper-berlin.de/en/fs_b2_neu_carmen.htm

ciao4now
Andrew

edit to add the pcmcia adapter is: Adaptec's DuoConnect AUA-1422 Usb2.0/1394 CardBus for Notebook
« Last Edit: November 09, 2005, 09:29:56 AM by TenoRichards »
dpa 4060's>BBox>acm modded pmd671 or Edirol r-09
www.tenorrichards.com

Offline twoodruff

  • Trade Count: (91)
  • Needs to get out more...
  • *****
  • Posts: 4687
  • Gender: Male
Re: Marantz 671 in the field...
« Reply #130 on: November 09, 2005, 08:55:17 AM »
fyi: it takes me ~4 mins to transfer a 2gb file from the 671 onto my laptop via a usb2/pcmcia adapter. I tried using a cf pcmcia adapter (the kind that actually HOLDS the cd card) and it took 18 minutes for ONE gb. Again, I'm going usb out on the 671 into my dell 8200 w/ xp SP2, via the pcmcia slot which HAS a usb 2 connection. I don't know what they are called....

4 mins ain't bad. I think I'll hold off on the OTG drive for now.

Tonites taping venture: http://www.staatsoper-berlin.de/en/fs_b2_neu_carmen.htm

ciao4now
Andrew

good info, thanks +t
No Mics
Clamps
Cables
No Preamp
Recorders

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz 671 in the field...
« Reply #131 on: November 09, 2005, 09:05:02 PM »
how does the 671 deal w/ files larger than 2GB? auto-split or nothing?
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline Genghis Cougar Mellen Khan

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 2238
  • Gender: Male
  • Tin Can > Wax String > Dictaphone
Re: Marantz 671 in the field...
« Reply #132 on: November 09, 2005, 09:14:57 PM »
how does the 671 deal w/ files larger than 2GB? auto-split or nothing?

You can set auto-tracking.  I had mine set to track-split every hour, worked like a charm. 
Maybe a couple of small scratches, but thats because these mics are chick magnets.
Girls always up on Andy tryin to grab these mics, the scratches are from their wedding rings.

CMC641 / DPA4022 / DPA4062>mod MPS6030
V3 / PMD671 / field ready DV-RA1000 / Oade W-mod PMD661 / PCM-M10

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz 671 in the field...
« Reply #133 on: November 09, 2005, 11:36:51 PM »
how does the 671 deal w/ files larger than 2GB? auto-split or nothing?

You can set auto-tracking.  I had mine set to track-split every hour, worked like a charm. 

thanks. +t

note to self: read the manual sober.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline RDunn

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 438
  • Gender: Male
Re: Marantz 671 in the field...
« Reply #134 on: November 15, 2005, 05:34:46 PM »
My first two field experiences with the 671 were coming digitally out of a Lunatec V3.  Since I had to return the loaner V3, the last two shows have been running line out of a Lunatec V2.  I had read some comments from other users about brickwalling on the analog inputs and I am happy to report there were no signs of that on my recordings...... 

So far I'm really liking the 671!!!!!!

RD
Schoeps MK4 > KC5 > CMC6 > Sound Devices 744T

 

RSS | Mobile
Page created in 0.085 seconds with 43 queries.
© 2002-2024 Taperssection.com
Powered by SMF