Become a Site Supporter and Never see Ads again!

Author Topic: Help with recording settings on rockboxed iRiver h140  (Read 1432 times)

0 Members and 1 Guest are viewing this topic.

Offline FotherMucker99

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 100
  • personal text goes here
Help with recording settings on rockboxed iRiver h140
« on: July 25, 2008, 08:18:56 AM »
Hey there!

I need immediate help, because I'm off for 'tallica in 2 hours!

My current settings on a rockboxed h140:

Volume: 0 dB
Gain Left: 18.0 dB
Gain Right: 18.0 dB
AGC: Safety (clip) 30.0 dB


How much dB do I have to set gain left/right to?

Is it OK this way?


Please help!
Cheers
FM

Offline Arni99

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 770
  • Gender: Male
Re: Help with recording settings on rockboxed iRiver h140
« Reply #1 on: July 25, 2008, 12:28:51 PM »
Ok, seems you are off for the show yet  ;D. Your settings of 18db gain and safety-clip activated should be ok.

I always start with +15db gain using my low-sens DPA 4061 or low-sens SP-CMC-8 cards.
Safety-clip lowers levels if clipping might occur, so don´t worry :).
I´m sure your did a great recording ;).
1st: SONY PCM-M10 + DPA 4060's + DPA MPS 6030 power supply (microdot)
2nd: iPhone 5 + "Rode iXY" microphone/"Zoom IQ5" microphone

 

RSS | Mobile
Page created in 0.062 seconds with 27 queries.
© 2002-2024 Taperssection.com
Powered by SMF