Become a Site Supporter and Never see Ads again!

Author Topic: Microphone Stand Accessory Question  (Read 2601 times)

0 Members and 1 Guest are viewing this topic.

backwhereubelong

  • Guest
  • Trade Count: (0)
Microphone Stand Accessory Question
« on: April 17, 2014, 01:54:41 AM »
I have a Manfrotto 3333 stand and I am looking for some sort of holder for two (2) Sony PCM-M10's ... I saw this and it looks like it would do the job and hold both (as the Sony's are only 1"thick by 2.5" wide) ... what do you all think?  Or is there something better for holding the recorders.

http://www.amazon.com/gp/product/B001D2TPZU/ref=ox_sc_act_title_5?ie=UTF8&psc=1&smid=ATVPDKIKX0DER


Offline 2manyrocks

  • Trade Count: (12)
  • Taperssection All-Star
  • ****
  • Posts: 1664
Re: Microphone Stand Accessory Question
« Reply #1 on: April 17, 2014, 11:21:04 PM »
For a single M10, I would use something like this that holds the recorder at whatever angle you need. 

http://www.ebay.com/itm/BGP73-Clamp-Bicycle-Handlebar-Mount-for-camera-fits-0-75-1-75-bar-/331153107204?pt=LH_DefaultDomain_0&hash=item4d1a436904

Cheap enough-buy two-one for each M10.


Offline lsd2525

  • Trade Count: (18)
  • Needs to get out more...
  • *****
  • Posts: 3400
  • Gender: Male
  • Eschew obfuscation
Re: Microphone Stand Accessory Question
« Reply #2 on: April 18, 2014, 08:16:02 AM »
Buy 3. I bought two and those things work great but have a habit of coming apart if you put too much pressure on them. I used some gorilla glue on the threads and they seem to hold together better now
Mics: SKM184's; ADK A51s; AT4041; Superlux S502; CK91 active w/homebrew BB; AT853; Naiant X-X; Nak 300's
Recorders: M10; DR-60D; DR-701D

backwhereubelong

  • Guest
  • Trade Count: (0)
Re: Microphone Stand Accessory Question
« Reply #3 on: April 18, 2014, 09:18:06 AM »
Sounds corny, but by looking at the picture I can't get my head around how to recorder sits in the clamp, can you take a picture of yours so I can see it.  Thanks for your advice & help.

Offline mccordo

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 614
  • Gender: Male
  • Area Man
Re: Microphone Stand Accessory Question
« Reply #4 on: April 18, 2014, 09:58:43 AM »
Sounds corny, but by looking at the picture I can't get my head around how to recorder sits in the clamp, can you take a picture of yours so I can see it.  Thanks for your advice & help.

The clamp attaches to your stand and the M10 has a threaded socket in the back that will accept the threaded screw end of the clamp. Like 2manyrocks said, this will allow you to put your M10 at nearly any angle since the threaded screw is adjustable.

« Last Edit: April 18, 2014, 10:21:04 AM by mccordo »
Mics: AKG ck63 Hypercards, AKG ck61 Cards, 2x nBob Actives (460B bodies unused), Rode NT6/MJE-384K Roadster (Michael Joly modded Cards), Audix M1280 Hypercards, Audix M1290 Cards, AT853 Cards, Church Audio CA-11 Cards, AT MT830R Omnis
Pres: Grace Design Lunatec V2, Edirol UA-5, Church Audio CA-9200, Naiant PIPsqueak
Recorders: SoundDevices MixPre-6, SoundDevices MixPre-3, 2x Tascam DR-100mkII, Sony PCM-M10

backwhereubelong

  • Guest
  • Trade Count: (0)
Re: Microphone Stand Accessory Question
« Reply #5 on: April 18, 2014, 01:53:37 PM »
I see!  Very cool.  Okay, that's the way I'll be doing it.  Thanks for your help (again).

Offline obaaron

  • Trade Count: (48)
  • Taperssection All-Star
  • ****
  • Posts: 1246
  • Gender: Male
  • Wide Awake in San Diego!
Re: Microphone Stand Accessory Question
« Reply #6 on: April 18, 2014, 08:17:10 PM »
Exactly what i use.....can even get a flat tray to clamp on to your stand to set a small preamp on ala Tinybox
Mics:  Gefell M20,M21- sms2000/nbob | Schoeps MK4V;MK4- cmc1L/cmc6/nbob | AKG ck1,3,8,22;ck61,62,63,69- c460b/c480b/Naiant/nbob actives | Neumann KM140/150 | AT853, AT933 | CA-11 | DPA 4022 (on loan)
Pres: Naiant Littlebox | Tinybox | BMod Edirol UA-5 | Church ST-9200
Recorders:  Zoom F8 | Tascam DR-680 | Tascam DR-60D | Sony PCM-M10
Video: Canon VIXIA HF R42

**ISO** -   Schoeps mk22 matched pair | Neumann Ak43 pair

Offline rodeen

  • Trade Count: (34)
  • Taperssection All-Star
  • ****
  • Posts: 1403
  • Gender: Male
  • Harmonica Man!
Re: Microphone Stand Accessory Question
« Reply #7 on: April 19, 2014, 03:45:22 PM »
Has anyone tried one of these with a Flip-style video camera?  Looks like it would work well.
"It's never too late to have a happy childhood!"
[LMA]: http://archive.org/search.php?query=taper%3A%22odeen%22&sort=-date

Offline Taper Chris

  • Trade Count: (7)
  • Taperssection Regular
  • **
  • Posts: 223
  • Gender: Male
  • wusupwitit?
    • what I've posted on archive
Re: Microphone Stand Accessory Question
« Reply #8 on: April 24, 2014, 05:18:40 PM »
"The thing about choosing the lesser of two evils is that your still choosing evil." JG

 

RSS | Mobile
Page created in 0.059 seconds with 33 queries.
© 2002-2024 Taperssection.com
Powered by SMF