Author Topic: AT 831 bodys + 853 caps (Read 2033 times)

run_run_run · « **on:** October 28, 2006, 07:43:01 PM »

Read somewhere it could be done, if so is it easy?

poorlyconditioned · « **Reply #1 on:** October 28, 2006, 07:54:03 PM »

Quote from: run_run_run on October 28, 2006, 07:43:01 PM

Read somewhere it could be done, if so is it easy?

Yep. Just do it

.

The threads are the same. The 853 caps are a bit bigger in diameter, but fit and function just fine. In fact, in some ways I *prefer* the 831 bodies as they are quite a bit smaller and they are made of metal, not plastic.

Richard

Pogue Mahone · « **Reply #2 on:** November 23, 2006, 09:10:26 PM »

This is my current setup, it works very very well. The caps are just a bit wider than the bodies but it isn't really noticable. The good thing about using them on the 831 bodies is that it makes the whole mic a lot A LOT smaller. I used it to stealth my first show, mounted in croakies and had no problem. You can hear a sample from the post I made a little bit earlier.

Author Topic: AT 831 bodys + 853 caps (Read 2033 times)

run_run_run

AT 831 bodys + 853 caps

poorlyconditioned

Re: AT 831 bodys + 853 caps

Pogue Mahone

Re: AT 831 bodys + 853 caps