Become a Site Supporter and Never see Ads again!

Author Topic: MiniMP me LIKE!  (Read 12367 times)

0 Members and 1 Guest are viewing this topic.

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10260
  • Gender: Male
  • I thought I heard.......
Re: MiniMP me LIKE!
« Reply #30 on: November 27, 2006, 07:09:22 AM »
oh..and fwiw, it fits standing up in my CAYIN II mtnsmth lumbar pack.  its tall, and stands up taller than anything else in the bag..but I can still zip it closed.
this is w/all the wires plugged in (RA neutriks that it is sitting on basically)
« Last Edit: November 27, 2006, 07:13:15 AM by Nick's Picks »

Offline Jamos

  • Trade Count: (61)
  • Taperssection All-Star
  • ****
  • Posts: 1646
  • Gender: Male
Re: MiniMP me LIKE!
« Reply #31 on: November 27, 2006, 02:31:44 PM »
oh..and fwiw, it fits standing up in my CAYIN II mtnsmth lumbar pack.


You mean CAIRN II, right? Or maybe it's a different bag...


Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10260
  • Gender: Male
  • I thought I heard.......
Re: MiniMP me LIKE!
« Reply #32 on: November 27, 2006, 03:31:40 PM »
nope, you're right.
cairn II.  just a different translation of memory.
:)

Offline Teen Wolf Blitzer

  • It's all ballbearings these days.
  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 5310
  • Gender: Male
  • I am Rattus Norvegicus.
    • Support Festival Radio
Re: MiniMP me LIKE!
« Reply #33 on: November 27, 2006, 06:30:01 PM »
Just grabbed me one off Fleabay for 580 shipped.  Hey Nick.  I can use the ESI batteries for this right?  I have 3 of the 6000's.  What cables do I need for that?  Will the ratshcak stuff work?  What ends?  Thanks!

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10260
  • Gender: Male
  • I thought I heard.......
Re: MiniMP me LIKE!
« Reply #34 on: November 27, 2006, 10:54:58 PM »
M tip+
ESI batteries, as long as they are anywhere between 6 to 12v, you're golden.
600mAh will run it for 6 hours plus.
great price! +T

BobW

  • Guest
  • Trade Count: (0)
Re: MiniMP me LIKE!
« Reply #35 on: December 14, 2006, 11:16:37 PM »
the power switch has two on settings, on is M-S, which outputs a normal stereo signal that you can adjust mid or side volume via the gain knobs,
or the STereo setting, which is just normal left/right. 

leaving it in ST mode while recording MS will output raw MS signals to be mixed in post.

or, am I not getting the question?

I was looking for some sample recordings in a most confusing way.
Actually, I'd love to hear an LSD2 into a MiniMP M-S vs. X-Y

The MiniMP doesn't have a compressor or limiter either, does it?
« Last Edit: December 16, 2006, 12:25:57 AM by _bob_ »

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10260
  • Gender: Male
  • I thought I heard.......
Re: MiniMP me LIKE!
« Reply #36 on: December 15, 2006, 06:48:25 AM »
nope..none of that

Offline headroom

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 204
    • My Work with Photos and for Documentary Cinema ( Soundjob)
Re: MiniMP me LIKE!
« Reply #37 on: March 22, 2007, 01:37:51 PM »
I have MINI MP and Me. I just used them for 6 month Me as AD, MP as pre. Today I made some soundtest in Mono.

I found the the difference from the 2 Apogee`s is small.
The MP has a bit more definition in the Presence ( computer harddrives whine 4 meters away in the back of the 2 miks ) and a little bit less noise than the Me. Me is a bit brighter, this is hearable with FM Radio noise.
The case of the MP is getting hotter than the ME.

Tested with channels swapped 2 times: Neuman TL 103 and 2 AT 3031 stock.

The 2Track team has desigend the Micamp for the MINI Me
Inside is

Mini ME

OP 275 1DC Comonsation?

INA 163 U 2x Mic Input

OP 4177 A

2x INA 163 UA Mic Input?

MinI MP:

3x OPA 134 UA Line Driver


OPA 2228 U Audio professional


OPA 2227 U Audio professional


INA 163  UA Mic Input


Output


2 x OP 275  Linedriver


OPA 134 UA Line Driver


Offline Kindguy

  • Team Bama
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 6390
  • Gender: Male
Re: MiniMP me LIKE!
« Reply #38 on: March 22, 2007, 02:50:18 PM »
I bet running an AD500e behind this would be awesome.

TDS!

DPA 4023> aeta PSP-2> Apogee Mini Me > R-44

http://www.basicallyfrightened.com/

Offline Kindguy

  • Team Bama
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 6390
  • Gender: Male
Re: MiniMP me LIKE!
« Reply #39 on: March 22, 2007, 03:00:45 PM »
I was thinking of maybe grabbing a MiniMP.

http://www.audiomidi.com/Mini-MP-P4558.aspx


Seems reasonable.  $727.00 shipped.

But I'm also kicking around getting a 4 channel Sytek w/ Burr Brown mods.   I like the looks of the Apogee Mini products.

You should PM frank at Cascade. He'll beat that price.

TDS!

DPA 4023> aeta PSP-2> Apogee Mini Me > R-44

http://www.basicallyfrightened.com/

Offline Simp-Dawg

  • Bad Little Dawggie
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 15077
  • Gender: Male
  • Daddy needs a drink!
    • Colorado Tapers
Re: MiniMP me LIKE!
« Reply #40 on: March 25, 2007, 01:00:07 AM »
i am really enjoying this box behind my MBHO's!  it's ergonomics suck but i had a laptop backpack i got for free from IBM when I worked there that holds the Mini-MP nicely in a target rack.  i just need to switch out the right-angle XLR'x I was using for the V3 to straight-angled ones!
CO Crüe Benchwarmer

Playback: Denon DVD-2910 > Denon AVR-3806 > Segue Doghouse Speaker Cable > B&W DM-610i / Klipsch RW-10 Subwoofer

Offline OOK

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 2727
  • Gender: Male
  • formerly OtherOneK
Re: MiniMP me LIKE!
« Reply #41 on: March 25, 2007, 03:17:31 AM »
i am really enjoying this box behind my MBHO's!  it's ergonomics suck but i had a laptop backpack i got for free from IBM when I worked there that holds the Mini-MP nicely in a target rack.  i just need to switch out the right-angle XLR'x I was using for the V3 to straight-angled ones!


I've been saying this since 2003.  The Ho's go great with an apogee....I was thinking about picking up a Mp to put in front of the minime....but I may pick up some ADKtl's insted....not sure yet....
DPA/HEB 4060's > R09HR
MBHO648/KA100Lk/KA200/KA300/KA500 > SD702

Offline Shawn

  • is old and tired
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 3250
  • Gender: Male
Re: MiniMP me LIKE!
« Reply #42 on: March 26, 2007, 07:41:49 AM »
i am really enjoying this box behind my MBHO's!  it's ergonomics suck but i had a laptop backpack i got for free from IBM when I worked there that holds the Mini-MP nicely in a target rack.  i just need to switch out the right-angle XLR'x I was using for the V3 to straight-angled ones!


I've been saying this since 2003.  The Ho's go great with an apogee....I was thinking about picking up a Mp to put in front of the minime....but I may pick up some ADKtl's insted....not sure yet....
if you decide to go the TL route shoot me a PM. I've got mine for sale right now.

 

RSS | Mobile
Page created in 0.219 seconds with 38 queries.
© 2002-2024 Taperssection.com
Powered by SMF