Become a Site Supporter and Never see Ads again!

Author Topic: Building Line Out Project  (Read 5384 times)

0 Members and 1 Guest are viewing this topic.

Offline it-goes-to-eleven

  • Trade Count: (58)
  • Needs to get out more...
  • *****
  • Posts: 6696
Re: Building Line Out Project
« Reply #15 on: March 29, 2007, 05:29:37 PM »
Thanks for the transformer reference, Chris!

Andrew, sounds like you may need to find a transformer like that locally..  Maybe print out the page?  An alternative might be to try and salvage the transformer from a dead speaker somewhere at the venue?

Unfortunately, I don't think many regular electricians could figure this one out.

Offline Church-Audio

  • Trade Count: (44)
  • Needs to get out more...
  • *****
  • Posts: 7571
  • Gender: Male
Re: Building Line Out Project
« Reply #16 on: March 29, 2007, 05:46:31 PM »
OK I did some research you can interface the 70volt system to a line input with this handy dandy device made by our friends are RDL LABS. this is the model of the device TX-70A this is the link to the PDF that explains how to connect it :) hehe http://www.rdlnet.com/pdf/Data_Sheets/tx-1a.pdf
This is the link that shows you where to buy it for $36.00 :)  hehe http://www.youdoitelectronics.com/id274.htm

Here is a picture of the device its very small very easy to fit inside your box :)
for warranty returns email me at
EMAIL Sales@church-audio.com

 

RSS | Mobile
Page created in 0.041 seconds with 31 queries.
© 2002-2024 Taperssection.com
Powered by SMF