Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: Phantom power question  (Read 1506 times)

0 Members and 1 Guest are viewing this topic.

Offline melvis1645

  • Trade Count: (21)
  • Taperssection Regular
  • **
  • Posts: 142
Phantom power question
« on: May 15, 2013, 06:46:41 PM »
I just purchased my first set of mics that phantom powered. If I am running them into a niant bigbox>pmd670 can I supply the power just from the preamp or does the recorder need set to phantom power as well? I would be running line in.
Logged

Offline DiggerinVA

  • Trade Count: (10)
  • Taperssection Member
  • ***
  • Posts: 296
  • Gender: Male
Re: Phantom power question
« Reply #1 on: May 15, 2013, 07:11:17 PM »
The Big Box supplies the Phantom power and connect the Big Box to the line in on the PMD670 not the mic in (you don't need the extra amplification stage). There is one Big Box that has a Phantom switch on it so you could defeat the phantom power. If this is that box you would only use that with dynamic or self powered mics.
Logged
Sony C38B's --> Lunatec V2-->PMD661
B-3's --> Tinybox 1.5 --> PCM-M10

Offline melvis1645

  • Trade Count: (21)
  • Taperssection Regular
  • **
  • Posts: 142
Re: Phantom power question
« Reply #2 on: May 15, 2013, 07:53:33 PM »
That is the box I have. Thanks for the info.
Logged
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.067 seconds with 31 queries.
© 2002-2024 Taperssection.com
Powered by SMF