it is actually the stereo flamingo
specs
here
violet flamingo
http://www.violet-design.ee/index.php?option=com_content&task=view&id=89&Itemid=130SPECIFICATIONS:
Transducer type
electrostatic
Operating principle
pressure gradient
Diaphragm's active diameter
26 mm
Frequency range
20 Hz to 20 kHz
Polar pattern
unidirectional - cardioid
Output impedance
50 ohms
Rated load impedance
1000 ohms
Suggested load impedance
>500 ohms
Sensitivity at 1000 Hz into 1000 ohms load
21,5 mV/Pa
S/N Ratio CCIR 468-3 weighted
76.5 dB
S/N Ratio DIN/IEC 651 A-weighted
87.5 dB-A
Equivalent noise level DIN/IEC A-weighted
6,5 dB-A
Maximum SPL for 0.5% THD at 1000 ohm load
133,5 dB
Dynamic range of the internal preamplifier
127 dB
Phantom powering voltage on pins #2 & #3 of XLR
+48 V (+/-4 V)
Current consumption
<2 mA
Output connector
3-pin XLR male, gold plated contacts
Signal polarity
Positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3
Dimensions
160 mm x 220 mm x 140 mm