Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: Epoxy?  (Read 2197 times)

0 Members and 1 Guest are viewing this topic.

Offline johnw

  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 3818
  • Gender: Male
    • My cd List
Epoxy?
« on: February 02, 2007, 10:25:41 PM »
I'd like to build a set of those super low-profile shorty RA cables but am wondering what epoxy people use and where they get it.
Logged
Schoeps MK41 & MK4V  |  Schoeps CMC6, Schoeps KCY, AKI/2C, PFA, Nbox Cable/PFA  |  Grace V2, Nbox Platinum  |  SD744T, SD MixPre 6, Sony PCM M10

Canon 16-35mm/2.8L mkii, 24-70mm/2.8L, 70-200mm/2.8L IS, 50mm/1.8 mkii, 135mm/2L, 100mm/2.8L IS, Sigma 35mm/1.4 A  |  Canon 5D mk4

Offline Church-Audio

  • Trade Count: (44)
  • Needs to get out more...
  • *****
  • Posts: 7571
  • Gender: Male
Re: Epoxy?
« Reply #1 on: February 02, 2007, 11:15:42 PM »
Quote from: johnw on February 02, 2007, 10:25:41 PM
I'd like to build a set of those super low-profile shorty RA cables but am wondering what epoxy people use and where they get it.

Hey John you can buy elmers 5 minute epoxy in any hardware store works great you can even buy color pigment this pigment is designed for resin not for paint you can get this stuff from a hobby shop. ( tryed paint tint once ) and it was not good things did not work out very well..

Logged
for warranty returns email me at
EMAIL Sales@church-audio.com
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.059 seconds with 27 queries.
© 2002-2024 Taperssection.com
Powered by SMF