Become a Site Supporter and Never see Ads again!

Author Topic: nakamichi cm-300 power issues  (Read 2296 times)

0 Members and 1 Guest are viewing this topic.

Offline GNARLYKAT

  • Trade Count: (3)
  • Taperssection Newbie
  • *
  • Posts: 15
nakamichi cm-300 power issues
« on: May 29, 2007, 10:23:47 AM »
my father in-law just gave me a set of nak cm-300's which use an old battery that is no longer avaiable. any ideas on changing over to phantom power or are there any other batteries that could be used for these mics? thanks in advance for your help.

Offline flipp

  • resident curmudgeon
  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 4285
Re: nakamichi cm-300 power issues
« Reply #1 on: May 29, 2007, 10:40:48 AM »
I believe those batteries are still available. Use the advanced search function but be prepared for unexpected results. Also check the "team nakamichi" thread for some alternatives to the everyready batteries. I recall reading about aftermarket replacements but don't recall exactly which thread the post was in.

Offline johnmuge

  • Trade Count: (12)
  • Taperssection Member
  • ***
  • Posts: 950
  • Gender: Male
Re: nakamichi cm-300 power issues
« Reply #2 on: May 29, 2007, 02:39:16 PM »
Eveready makes a 9 volt that fits them.  Radio Shack has them.
> AKG c480b(ck61,ck63) Naiant Couplings-PFA / Beyer MC930 / Milab VM-44 link / Nevaton MCE400
 > Littlebox w/output xformers / Tinybox w/ dual output  
 > Tascam DR-680, DR70d / Sony M-10 / Oade ACM Marantz PMD660

Offline GNARLYKAT

  • Trade Count: (3)
  • Taperssection Newbie
  • *
  • Posts: 15
Re: nakamichi cm-300 power issues
« Reply #3 on: May 29, 2007, 03:18:35 PM »
thanks and thanks

 

RSS | Mobile
Page created in 0.07 seconds with 30 queries.
© 2002-2024 Taperssection.com
Powered by SMF