Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1] 2  All   Go Down

Author Topic: CD Wave issues/questions  (Read 5646 times)

0 Members and 1 Guest are viewing this topic.

Offline Mitchell (Jake and Sawyer's Dad)

  • The old man knooooooows..... very well.
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 10019
  • Gender: Male
  • "Rock stars... is there anything they don't know?"
CD Wave issues/questions
« on: October 07, 2004, 12:14:32 PM »
I will be using this to put tracks in my sets from a JB3, but I tried it out last night trying to go from a disc - I had mucho problems.  I have a disc of one of my bands shows that a friend recorded to a digital recorder.  It is in .wav format, but not tracked.

Here is what I did:

Downloaded version 1.93.3
Opened the program
Put my disc in the drive
Clicked "File", then "Extract CD Audio"
I then pick the directory where I want to disc to be extracted to
It them starts its process.
When the process is done, I get an error message, although, the screen is filled with wavelengths, etc indictate that there is something there!
I press play, and it plays at like 5 times the normal speed.

What am I doing wrong?  Do I need to save the disc on my computer first, then import it into CD Wave??

Help!!!!!!!!!! :-[ ::) :P :'(
Logged
Bass Rig:

Modulus - Korg DR1 - CAE 4X4
Channel 1:  CAE 4x4 - ADA PreAmp - Decmeter Tube PreAmp - Meyer UX-1 - Meyer EQ - Meyer CQ2
Channel 2:  CAE 4x4 - Boss OC3/Meatball/CAE 150.1 - Eventude 4000
Channel 3 - Decmeter  Tude Direct - CAE 150.1 - SWR 400 - SWR Goliath

Offline The Kilted Taper

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2344
  • Gender: Male
  • Real men wear kilts.
Re: CD Wave issues/questions
« Reply #1 on: October 07, 2004, 12:40:51 PM »
You may want to try extracting from the CD using EAC. I am sure there is a link for it on etree.org. I've never used CDWav for extraction, so I have no idea how good/bad it is. EAC is great for extraction.
Logged
"The guy who's been dissed, dismissed and demoted so often that he should have officially changed his first name to "Backup." "

Offline Mitchell (Jake and Sawyer's Dad)

  • The old man knooooooows..... very well.
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 10019
  • Gender: Male
  • "Rock stars... is there anything they don't know?"
Re: CD Wave issues/questions
« Reply #2 on: October 07, 2004, 12:46:05 PM »
So - if I use EAC, does it just extract it to a directory but keep it in .wav?  I am guessing I would extract the file from the CD, save it on my computer, then open it with CD Wave and track it?
Logged
Bass Rig:

Modulus - Korg DR1 - CAE 4X4
Channel 1:  CAE 4x4 - ADA PreAmp - Decmeter Tube PreAmp - Meyer UX-1 - Meyer EQ - Meyer CQ2
Channel 2:  CAE 4x4 - Boss OC3/Meatball/CAE 150.1 - Eventude 4000
Channel 3 - Decmeter  Tude Direct - CAE 150.1 - SWR 400 - SWR Goliath

Offline Ed.

  • your popsicle's melting
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 8662
  • Gender: Male
  • FJ Baby!
Re: CD Wave issues/questions
« Reply #3 on: October 07, 2004, 01:02:26 PM »
it'll save the file as a wav, however, if the wav is already split on the cd, you'll get multiple wavs.
Logged


Because nothing says "I have lots of money and am sort of confused as to how to spend it" like Bose.

Offline Mitchell (Jake and Sawyer's Dad)

  • The old man knooooooows..... very well.
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 10019
  • Gender: Male
  • "Rock stars... is there anything they don't know?"
Re: CD Wave issues/questions
« Reply #4 on: October 07, 2004, 01:13:00 PM »
Quote from: SpeshulEd on October 07, 2004, 01:02:26 PM
it'll save the file as a wav, however, if the wav is already split on the cd, you'll get multiple wavs.

Its not already spilt - that is why I am using the CD Wave - to put track splits in.  Right now, it is just one long track on the CD.
Logged
Bass Rig:

Modulus - Korg DR1 - CAE 4X4
Channel 1:  CAE 4x4 - ADA PreAmp - Decmeter Tube PreAmp - Meyer UX-1 - Meyer EQ - Meyer CQ2
Channel 2:  CAE 4x4 - Boss OC3/Meatball/CAE 150.1 - Eventude 4000
Channel 3 - Decmeter  Tude Direct - CAE 150.1 - SWR 400 - SWR Goliath

Offline Ed.

  • your popsicle's melting
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 8662
  • Gender: Male
  • FJ Baby!
Re: CD Wave issues/questions
« Reply #5 on: October 07, 2004, 01:18:08 PM »
gotcha, i was thinking maybe you wanted to resplit something better than what it mighta been split.  i dunno, it happens sometimes.  but yeah, eac is great, best ripper i've ever used.
Logged


Because nothing says "I have lots of money and am sort of confused as to how to spend it" like Bose.

Offline twatts (pants are so over-rated...)

  • <://PHiSH//><
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 9941
  • Gender: Male
  • Lego made a Mini-Fig of me!
Re: CD Wave issues/questions
« Reply #6 on: October 07, 2004, 01:31:09 PM »
Quote from: thedoodisjam on October 07, 2004, 01:13:00 PM
Quote from: SpeshulEd on October 07, 2004, 01:02:26 PM
it'll save the file as a wav, however, if the wav is already split on the cd, you'll get multiple wavs.

Its not already spilt - that is why I am using the CD Wave - to put track splits in.  Right now, it is just one long track on the CD.

DL and install Exact Audio Copy.
Extract to your HD using EAC, if you use the "uncompressed" feature, it will save as 16/44.1 WAV.
Open the WAV in CDWave.
Track.
Save.
Done.

Logged
***Do you have PHISH, VIDA BLUE, JAZZ MANDOLIN PROJECT or any other Phish related DATs/Tapes/MDs that need to be transferred???  I can do them for you!!!***

I will return your DATs/Tapes/MDs.  I'll also provide Master FLAC files via DropBox.  PM me for details.

Sony PCM R500 > SPDIF > Tascam HD-P2
Nakamichi DR-3 > (Oade Advanced Concert Mod) Tascam HD-P2
Sony MDS-JE510 > Hosa ODL-276 > Tascam HD-P2

******

Offline Mitchell (Jake and Sawyer's Dad)

  • The old man knooooooows..... very well.
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 10019
  • Gender: Male
  • "Rock stars... is there anything they don't know?"
Re: CD Wave issues/questions
« Reply #7 on: October 07, 2004, 01:42:27 PM »
You guys are SOOOOO FRIGGIN HELPFUL around here - thanks!  I have never been associated with a board as great and tolerant as this one!

I will give this a shot tonight and see what happens.  I will check back in.
Logged
Bass Rig:

Modulus - Korg DR1 - CAE 4X4
Channel 1:  CAE 4x4 - ADA PreAmp - Decmeter Tube PreAmp - Meyer UX-1 - Meyer EQ - Meyer CQ2
Channel 2:  CAE 4x4 - Boss OC3/Meatball/CAE 150.1 - Eventude 4000
Channel 3 - Decmeter  Tude Direct - CAE 150.1 - SWR 400 - SWR Goliath

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: CD Wave issues/questions
« Reply #8 on: October 07, 2004, 01:53:49 PM »
just dont forget, configuring EAC for optimum drive read iffset is VERY tricky, it takes a store-bought cd and a few blanks to configure properly :)
Logged
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Mitchell (Jake and Sawyer's Dad)

  • The old man knooooooows..... very well.
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 10019
  • Gender: Male
  • "Rock stars... is there anything they don't know?"
Re: CD Wave issues/questions
« Reply #9 on: October 07, 2004, 01:56:50 PM »
Quote from: bean on October 07, 2004, 01:53:49 PM
just dont forget, configuring EAC for optimum drive read iffset is VERY tricky, it takes a store-bought cd and a few blanks to configure properly :)

Great - now I am screwed again!  I will never figure all this out..........
Logged
Bass Rig:

Modulus - Korg DR1 - CAE 4X4
Channel 1:  CAE 4x4 - ADA PreAmp - Decmeter Tube PreAmp - Meyer UX-1 - Meyer EQ - Meyer CQ2
Channel 2:  CAE 4x4 - Boss OC3/Meatball/CAE 150.1 - Eventude 4000
Channel 3 - Decmeter  Tude Direct - CAE 150.1 - SWR 400 - SWR Goliath

Offline Ed.

  • your popsicle's melting
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 8662
  • Gender: Male
  • FJ Baby!
Re: CD Wave issues/questions
« Reply #10 on: October 07, 2004, 01:58:13 PM »
its not too bad, theres a startup wizard in the program that helps a bit.
Logged


Because nothing says "I have lots of money and am sort of confused as to how to spend it" like Bose.

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: CD Wave issues/questions
« Reply #11 on: October 07, 2004, 01:58:32 PM »
Quote from: thedoodisjam on October 07, 2004, 01:56:50 PM
Quote from: bean on October 07, 2004, 01:53:49 PM
just dont forget, configuring EAC for optimum drive read iffset is VERY tricky, it takes a store-bought cd and a few blanks to configure properly :)

Great - now I am screwed again!  I will never figure all this out..........

im testing out the DAE in cdwave now mtchell, i'll letcha know what i come up w/ ;D
Logged
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Mitchell (Jake and Sawyer's Dad)

  • The old man knooooooows..... very well.
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 10019
  • Gender: Male
  • "Rock stars... is there anything they don't know?"
Re: CD Wave issues/questions
« Reply #12 on: October 07, 2004, 01:59:10 PM »
Quote from: SpeshulEd on October 07, 2004, 01:58:13 PM
its not too bad, theres a startup wizard in the program that helps a bit.

Everyone - keep your fingers crossed while I try this tonight!
Logged
Bass Rig:

Modulus - Korg DR1 - CAE 4X4
Channel 1:  CAE 4x4 - ADA PreAmp - Decmeter Tube PreAmp - Meyer UX-1 - Meyer EQ - Meyer CQ2
Channel 2:  CAE 4x4 - Boss OC3/Meatball/CAE 150.1 - Eventude 4000
Channel 3 - Decmeter  Tude Direct - CAE 150.1 - SWR 400 - SWR Goliath

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: CD Wave issues/questions
« Reply #13 on: October 07, 2004, 02:01:02 PM »
Logged
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Ed.

  • your popsicle's melting
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 8662
  • Gender: Male
  • FJ Baby!
Re: CD Wave issues/questions
« Reply #14 on: October 07, 2004, 02:01:35 PM »
remember sector boundaries in cdwave too

________________|_____________
song A 44:56.00  (split) 44:56.01 song B


it should look like that when you split.
Logged


Because nothing says "I have lots of money and am sort of confused as to how to spend it" like Bose.
Pages: [1] 2  All   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.118 seconds with 40 queries.
© 2002-2024 Taperssection.com
Powered by SMF