Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: zoo440 on July 23, 2016, 10:06:31 AM
-
i have problem with my sony m10, i recorded a live gig in outdoors rock festival, my problem is the sound i've recorded is very low ,
i used SP-CMC-8 mics and sp-spsb-11 battery box, sony m10 setting was line input, limiter off,low cut off, iow mics sensitive, manual rec, level 8
volume indicator was mostly 50 percent i don't know why it was happened, i needed 80 percent volume gain ,should i connect SP-CMC-8 to mics input? sony m10 has two inputs -mics input and line input- should i have connected the mics to mics input? i need your advice please solve my problem,
-
I would use mic input with a battery box on the M10(thats how i always record shows)i only use line input with a preamp,also the Low Cut on M10 does not affect line input only mic input.
-
really thanks for your reply, i think you're right, if i connect the mics with a battery box to mics input on sony m10 the sound is louder than line input
-
When you say 50%, do you mean halfway on the meters, i.e., -12dB? If so, that's a totally reasonable level, especially if you're recording 24 bit.
That said, recording with mic in with your setup should be fine for everything but the very loudest shows. My personal rule of thumb: if I don't need earplugs, I should go mic in.
-
i'm not an american, so i'm not good at speaking english well, lacking for explanation
the files i've recorded were 24 bit/wav and volume indicator on display was moving from 0 to 50 percent, i wanted it to over 80 percent by adjusting rec level and i tried to solve the problem to adjust rec level untill 8 or 9 but the volume meter on display was not moving over 50 percent, , i transferred the files to computer and listened to the raw files as wav format ,sound was very clear but volume was low ,not normal ,what's wrong with my gears?
-
i'm not an american, so i'm not good at speaking english well, lacking for explanation
the files i've recorded were 24 bit/wav and volume indicator on display was moving from 0 to 50 percent, i wanted it to over 80 percent by adjusting rec level and i tried to solve the problem to adjust rec level untill 8 or 9 but the volume meter on display was not moving over 50 percent, , i transferred the files to computer and listen to the raw files as wav format ,sound is very clear but volume is low ,not normal ,what's wrong with my gears?
just amplify it in post
-
i'm not an american, so i'm not good at speaking english well, lacking for explanation
the files i've recorded were 24 bit/wav and volume indicator on display was moving from 0 to 50 percent, i wanted it to over 80 percent by adjusting rec level and i tried to solve the problem to adjust rec level untill 8 or 9 but the volume meter on display was not moving over 50 percent, , i transferred the files to computer and listen to the raw files as wav format ,sound is very clear but volume is low ,not normal ,what's wrong with my gears?
just amplify it in post
Yeah, a Normalize filter should do the trick. Though if there are one or two big loud spikes, you may need to reduce the volume of those before Normalize can work its full magic.