Become a Site Supporter and Never see Ads again!

Author Topic: dat to computer help needed~  (Read 2116 times)

0 Members and 1 Guest are viewing this topic.

Offline Pelican

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 32
  • I'm a llama!
dat to computer help needed~
« on: April 05, 2004, 10:54:32 PM »
ok, the time has come for me to transfer my precious dats onto computer.  the computer in question has a crummy soundcard, so i believe i'll need to buy one and connect it to the cpu via usb.  what's the most cost effective way to do this?

in other words, on one side of the chasm, i've my dat, and on the other end, the computer.  what's the best bridge i can build between the two on a budget?

also, i assume i'll have to finally buy one of those pesky 7-pins.  i'm about to head over to the yardsale but it can't hurt to ask, is anyone here selling one?

thanks for your help :)
dave    

Offline hzgone

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 2193
  • Gender: Male
Re:dat to computer help needed~
« Reply #1 on: April 05, 2004, 11:05:26 PM »
audiophile 2496 can find them for 150 on ebay or maybe cheaper then run coax from you dat to the soundcard.
http://db.etree.org/hzgone
http://dead.no-ip.info

AKG 391's>MiAGi-II Silver Cables>V3>VX Pocket V2>Fujitsu 2110

on hiatus, semi retired, injured reserve, got hitched, had 2 kids, broke as hell, & my life is over patcher stage of life...

Offline Pelican

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 32
  • I'm a llama!
Re:dat to computer help needed~
« Reply #2 on: April 05, 2004, 11:07:31 PM »
bless you for such quick reply ;)

actually, after googling it, i've another question.  it's not my computer i'm dumping these dats onto so i'll not be able to actually install a soundcard "into" the computer.  would i be able to connect the audiophile externally into the computer, via usb for example?

in other words, i *can* install a driver, but i can't open the computer up and put the soundcard in there.  is the 2496 still a viable option?

thanks,
d
« Last Edit: April 05, 2004, 11:13:40 PM by SeaOwl »

Offline mgleason007

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 356
  • Gender: Male
  • Mmmmm, yummy
    • My Bootleg List
Re:dat to computer help needed~
« Reply #3 on: April 06, 2004, 01:21:01 AM »
Well that makes things a tad more complicated but I believe you can get a USB version of the 2496.  I'm sure there are cheaper bit perfect cards out there too.
Mike

Offline Pelican

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 32
  • I'm a llama!
Re:dat to computer help needed~
« Reply #4 on: April 06, 2004, 07:08:48 AM »
i was reading about something called the m-audio transit.  anyone here use this.  my dat recordings are 48k so i assume i need to make sure whatever bridge i use between the cpu and the dat is capable of handling this.

any more help would be warmly welcomed.  i'm going to be transferring the dats this week and want to make the wisest purchase possible.

thanks,
d

Offline BCostigan

  • I can resist everything except temptation
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 3691
  • Gender: Male
  • Loose Lucy is my delight
    • GranitePhotography
Re:dat to computer help needed~
« Reply #5 on: April 06, 2004, 07:13:34 AM »
You might try the edirol ua-1d.  It is *NOT* bit perfect but in the many recordings I transfered it never gave me any trouble.
"A Hippie is someone who walks like Tarzan, looks like Jane, and smells like Cheetah."  ~Ronald Reagan

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re:dat to computer help needed~
« Reply #6 on: April 06, 2004, 08:29:43 AM »
You might try the edirol ua-1d.  It is *NOT* bit perfect but in the many recordings I transfered it never gave me any trouble.

every recording i made w/ that thing has at least ONE pop/click in it, and i tweaked my comp the best to my knowledge, so id look else, but YMMV
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Pelican

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 32
  • I'm a llama!
Re:dat to computer help needed~
« Reply #7 on: April 06, 2004, 11:45:49 PM »
thanks all :)
d

 

RSS | Mobile
Page created in 0.281 seconds with 33 queries.
© 2002-2024 Taperssection.com
Powered by SMF