Become a Site Supporter and Never see Ads again!

Author Topic: Marantz PMD 671 in the field Part 3...  (Read 91974 times)

0 Members and 1 Guest are viewing this topic.

spreadheadtom

  • Guest
  • Trade Count: (0)
Re: Marantz PMD 671 in the field Part 3...
« Reply #240 on: August 11, 2006, 12:33:38 PM »
update on my problem. 

Spoke with Doug this morning and he could not find anything wrong with it. He has decided that the problem lies within the 9V wally battery.  He told me that the unit needs at least 12V to power the phantom power and as the voltage started dropping on the 9V this was causing the levels to slowly fade away.  He recommended me using at least a 12V as an external source and using either Energizer or Duracell for the internals.

is anyone running a 9V wal-mart battery besides me?

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #241 on: August 11, 2006, 01:56:11 PM »
is anyone running a 9V wal-mart battery besides me?
: raises hand :

me too. uh oh.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

spreadheadtom

  • Guest
  • Trade Count: (0)
Re: Marantz PMD 671 in the field Part 3...
« Reply #242 on: August 11, 2006, 02:28:19 PM »
is anyone running a 9V wal-mart battery besides me?
: raises hand :

have you had any problems with it? 

  At Mphis panic I tried 3 different 9V to no avail.  --  only had the problem occur one time before and that was towards the end of the night of the festival.  So it makes since that the battery was draining and that's why I lost power.


I'm gonna start running internals only.

spreadheadtom

  • Guest
  • Trade Count: (0)
Re: Marantz PMD 671 in the field Part 3...
« Reply #243 on: August 11, 2006, 02:37:09 PM »
is anyone running a 9V wal-mart battery besides me?
: raises hand :
have you had any problems with it? 
no tommy, not a one.  I've used four different ones too.  I'm looking through the user manual trying to find if there is an acceptable voltage range listed but I can't find one.

Doug was pretty convinced that this was the problem.  It may be the 414's causing it (they are twice as hungry as any other)


spreadheadtom

  • Guest
  • Trade Count: (0)
Re: Marantz PMD 671 in the field Part 3...
« Reply #244 on: August 11, 2006, 02:57:11 PM »
is anyone running a 9V wal-mart battery besides me?
: raises hand :
have you had any problems with it? 
no tommy, not a one.  I've used four different ones too.  I'm looking through the user manual trying to find if there is an acceptable voltage range listed but I can't find one.
Doug was pretty convinced that this was the problem.  It may be the 414's causing it (they are twice as hungry as any other)
I agree, it's probably not the 671.  I think you're the only one consisitently running LD mics into a 671 at the moment so you're definitely acting as guinea pig for the rest of us in that regard.
+t for your troubles bud.  start stocking up on internals I guess.

+T backatcha

I'm gonna use Drew's/Trey's ACM this weekend and really want to try the 9V with theirs just to see. 

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #245 on: August 11, 2006, 03:03:38 PM »
the only time i have run 9v was at wsp in st louis. everything was fine except i forgot to record the encore. no batt issues.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline nottingham

  • Trade Count: (18)
  • Taperssection Member
  • ***
  • Posts: 371
  • There's wisemen hiding in the mountains
Re: Marantz PMD 671 in the field Part 3...
« Reply #246 on: August 12, 2006, 11:09:03 AM »
I've ran the wally 9 volt several times with no problem however, I have switched to a 12 volt from battery geeks after reading this tread. My question is that using the sled with Nimh only provides 9.6 volts is this correct?
Schoeps MK4-MK41>cmc6/Nbob actives/Naiant LB/Naiant TB > Sony M10/PMD620

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10811
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: Marantz PMD 671 in the field Part 3...
« Reply #247 on: August 12, 2006, 11:25:23 AM »
I use external AA NiMh battery packs, a modified version of the internal sled with AA NiMh and on occasion a 12v SLA. I haven't used the 9v DVD batteries, as I'm a bit leary of using them after hearing things like this. They did work well with the Mini-Me, when I had that, though.
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline leehookem

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 4439
  • Gender: Male
    • Texas Tapers
Re: Marantz PMD 671 in the field Part 3...
« Reply #248 on: August 12, 2006, 12:02:34 PM »
I've ran the wally 9 volt several times with no problem however, I have switched to a 12 volt from battery geeks after reading this tread. My question is that using the sled with Nimh only provides 9.6 volts is this correct?

correct
www.texastapers.org


AKG c480b ck61/ck63 > Tascam DR-70D
Oade ACM Marantz PMD-671
AKG ck61/63 > NBob Actives > Naiant PFA > Tascam DR-70D
Oade ACM Marantz PMD-671
Audiophile 2496 > Mytek Stereo96 DAC > Sony MDR-7506
Dual 1229 > Marantz 2270 > Kimber Kables > Cerwin Vega VS120

Canon Rebel XSi, EF 50 mm f/1.8, EF-S 18-55mm f/3.5-5.6 IS

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #249 on: August 12, 2006, 02:18:51 PM »
i am going back to AA's. anyone need 2 brand new 9v's?
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

spreadheadtom

  • Guest
  • Trade Count: (0)
Re: Marantz PMD 671 in the field Part 3...
« Reply #250 on: August 14, 2006, 10:37:32 AM »
anyone need 2 brand new 9v's?

Kevin does.

Offline twoodruff

  • Trade Count: (91)
  • Needs to get out more...
  • *****
  • Posts: 4687
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #251 on: August 16, 2006, 11:22:47 AM »
i am going back to AA's. anyone need 2 brand new 9v's?

are there any other external options, as in one with 15 volts output with enough juice to power that thing
No Mics
Clamps
Cables
No Preamp
Recorders

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #252 on: August 16, 2006, 11:25:21 AM »
i bet a "laptop" battery(valence) like i used for the vaio would work.


Quote
are there any other external options, as in one with 15 volts output with enough juice to power that thing
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline JasonSobel

  • Trade Count: (8)
  • Needs to get out more...
  • *****
  • Posts: 3327
  • Gender: Male
    • My show list
Re: Marantz PMD 671 in the field Part 3...
« Reply #253 on: August 16, 2006, 02:55:31 PM »
i am going back to AA's. anyone need 2 brand new 9v's?

are there any other external options, as in one with 15 volts output with enough juice to power that thing

there's a whole bunch of L-ion battery packs with 14.8 volts...
http://www.batteryspace.com/index.asp?PageAction=VIEWCATS&Category=898
don't know if they'll work for sure, but I'd say there's a good chance.

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #254 on: August 16, 2006, 04:27:14 PM »
thanks for the link jason. t
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

 

RSS | Mobile
Page created in 0.08 seconds with 43 queries.
© 2002-2024 Taperssection.com
Powered by SMF