Become a Site Supporter and Never see Ads again!

Author Topic: Replacement Manfrotto screw?  (Read 3275 times)

0 Members and 1 Guest are viewing this topic.

Offline vwmule

  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 2051
Replacement Manfrotto screw?
« on: March 17, 2019, 02:35:45 PM »
Brought stand to Panic last night and noticed the locking screw was gone -- strange as I don't use the stand that often. Anyone know the replacement part number? I can't seem to find.

It's the red piece shown in picture.

https://www.bhphotovideo.com/c/product/644444-REG/Manfrotto_1004BAC_Alu_Master_3_Riser.html

Offline perks

  • Trade Count: (31)
  • Needs to get out more...
  • *****
  • Posts: 5171
    • Recordings uploaded to TTD
Re: Replacement Manfrotto screw?
« Reply #1 on: March 17, 2019, 09:15:08 PM »
I think its in the diagram here....

https://www.manfrottospares.com/1004bac-parts.html
Mics: Schoeps MK5's, Schoeps MK41's, AT853's (C,SC,H,O), DPA 4061's
Preamps/converters: Schoeps VMS52UB (x2), Nbox (x2), E.A.A. PSP-2 (x2) Grace Lunatec V2, Sound Devices MP-2, DPA MMA6000, Naiant Tinybox v1.5, Naiant PiPsqueak, Church Ugly, Apogee Mini-Me, Benchmark AD2k+
Recorders: Tascam DR-680, Korg MR-1, Edirol R-05, Sony PCM-M10 (x2), Tascam DR-07, Marantz PMD-661, Sound Devices Mixpre-3

Offline vwmule

  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 2051
Re: Replacement Manfrotto screw?
« Reply #2 on: March 17, 2019, 10:04:49 PM »
Thanks. Says discontinued. I'll call B&H.

Offline danny3

  • Trade Count: (11)
  • Taperssection Regular
  • **
  • Posts: 223
  • Gender: Male
Re: Replacement Manfrotto screw?
« Reply #3 on: March 19, 2019, 11:12:06 AM »
I lost that same screw from the same stand at a festival a while back. After retracing my steps and scanning the ground for over an hour I gave up, only to find it in the grass below my tailgate.

Offline tivva

  • Trade Count: (2)
  • Taperssection Newbie
  • *
  • Posts: 39
  • Gender: Male
  • Have Fun...Life's way too short!
    • Paul's Digital List
Re: Replacement Manfrotto screw?
« Reply #4 on: March 25, 2019, 03:27:28 PM »
Thanks. Says discontinued. I'll call B&H.

just go to your local hardware store...it's either fine or coarse thread?  might even have the correct wingnut size like i found....
total cost .89 cents...good luck!
pax...
tiv

Nak700's CP701>RPS>V3> Sony D-50
Sonic's DSM6-L >Sony D50

 

RSS | Mobile
Page created in 0.083 seconds with 34 queries.
© 2002-2024 Taperssection.com
Powered by SMF