Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: ricola on December 14, 2015, 05:13:36 PM
-
Hello folks,
I need a special cable for my Stereo mic to minimise noise interference by using two twisted cores (Star Quad Cable for Example Canare or Van Damme).
It is a (1) 5pin XLR split to (2) 3pin XLR adapter cable like this but used with that special Star Quad cable.
http://www.canford.co.uk/CANFORD-XLR-XLR-Y-LEADS-5-PIN-TO-DUAL-3-PIN
I still have this terrible cell noises (HF noises) in many of my recordings. So I think to use a Stare Quad cable is the ONLY way to eliminate this noises.
My Question: is there any experienced guy out here who can soldering me such a custom made cable of about 50cm length??
Thanks and greetings from Germany
ricola
-
Try tgakidis (http://taperssection.com/index.php?topic=133186.0 (http://taperssection.com/index.php?topic=133186.0)) or darktrain (http://taperssection.com/index.php?topic=110932.0 (http://taperssection.com/index.php?topic=110932.0)). They can make just about any cable you might need...
-
Serious question, how close is your cell phone to your gear & do your recordings not have interference when you leave the cell @ home?
-
Thanks and greetings from Germany
ricola
Maybe you could contact these guys?
http://www.filmtontechnik.de/kortwich-produkte/kabel/mikrofonkabel-xlr/
FWIW.
-
Hello folks,
I need a special cable for my Stereo mic to minimise noise interference by using two twisted cores (Star Quad Cable for Example Canare or Van Damme).
It is a (1) 5pin XLR split to (2) 3pin XLR adapter cable like this but used with that special Star Quad cable.
http://www.canford.co.uk/CANFORD-XLR-XLR-Y-LEADS-5-PIN-TO-DUAL-3-PIN
I still have this terrible cell noises (HF noises) in many of my recordings. So I think to use a Stare Quad cable is the ONLY way to eliminate this noises.
My Question: is there any experienced guy out here who can soldering me such a custom made cable of about 50cm length??
Thanks and greetings from Germany
ricola
Canford Audio will make it for you.
Urder the cable from their website, order the connectors (in your case I would use the Neutrik EMC ones) and Canford Audio will make the can=ble to whatever length you require.
It's an excellent service and I have used it myself several times.