Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: lordbelial on October 08, 2005, 08:08:39 PM
-
I there, I need your help guys.
Since I upgraded my mics to CMC-4 (AT835) with 3'5 mm stereo male jack terminated, I have an extra mics, the BMC-2 (low cost binaurals from SP), 3.5 mm jack too.
I would like to build a battery box for those mics, because I want to loan those mics to a friend of mine, and I have my own battery box, SP-SPSB-1, which one I can't sepparate from me.
So, my question is... Someone knows a good desing for a 9V battery box with input and output 3.5 mm stereo jack?
I knew of the three wire battery box for AT853 from "poorlyconditioned", but I don't really know what adaptation Should I do for my desing purpose.
Thanks in advance.
-
I'd try doing a search on here, or a Google in general, there's plenty of plans floating around.
-
http://burak.relyon.ca/live/battbox.html