Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: mating my KM 235 T-bar and Superlux HM-32 mounts  (Read 1509 times)

0 Members and 1 Guest are viewing this topic.

Offline EarlyMorningRain

  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 2779
mating my KM 235 T-bar and Superlux HM-32 mounts
« on: April 04, 2008, 01:46:53 PM »
ok, so I'm building my first rig and am almost there. Latest hurdle (and hopefully the last) is mating my Superlux HM-32 mounts to my KM235 Tbar.

I'm thinking I need the 5/8 to 3/8 adapter (that same piece for $5 you can find on micsupply). Can anyone confirm this so I'm buying the correct thing on the first go?

Thanks and +T in advance!


Logged

Offline johnw

  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 3818
  • Gender: Male
    • My cd List
Re: mating my KM 235 T-bar and Superlux HM-32 mounts
« Reply #1 on: April 04, 2008, 04:05:13 PM »
Well the HM-32 I had came with an adapter screwed in. Just take that out and screw them onto the KM235. Careful though as the HM-32 is plastic and will strip easily.
Logged
Schoeps MK41 & MK4V  |  Schoeps CMC6, Schoeps KCY, AKI/2C, PFA, Nbox Cable/PFA  |  Grace V2, Nbox Platinum  |  SD744T, SD MixPre 6, Sony PCM M10

Canon 16-35mm/2.8L mkii, 24-70mm/2.8L, 70-200mm/2.8L IS, 50mm/1.8 mkii, 135mm/2L, 100mm/2.8L IS, Sigma 35mm/1.4 A  |  Canon 5D mk4

Offline EarlyMorningRain

  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 2779
Re: mating my KM 235 T-bar and Superlux HM-32 mounts
« Reply #2 on: April 04, 2008, 04:26:17 PM »
that's it - bingo!

Didn't realize that was an adapter in there and thus removable
(however after seeing the plastic in there, would rather leave that adapter in there!)   :o

Thanks
+T !!

Logged
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.062 seconds with 27 queries.
© 2002-2024 Taperssection.com
Powered by SMF