Become a Site Supporter and Never see Ads again!

Author Topic: AKG CK93 Active Setup Issue  (Read 1547 times)

0 Members and 1 Guest are viewing this topic.

Offline jdwtyl

  • Trade Count: (9)
  • Taperssection Member
  • ***
  • Posts: 271
AKG CK93 Active Setup Issue
« on: June 29, 2010, 07:59:29 PM »
I have a pair of AKG CK93s with actives.  One of the connections going into the cap is a bit loose and will cause the signal to drop out if it is not perfectly positioned.  Does anyone know where I can get this repaired?  Any help would be great!

Thanks,
Jay
Schoeps MK22, MK41 - Matched Pairs
Schoeps CMC6 x4, Schoeps CMR - Pair
Naiant Tinybox, Edirol UA-5 (bm2p+), Naiant PFA
SD MixPre-6ii, Edirol R-44 (OCM), Edirol R-09HR, Tascam DR-2D

Offline Gordon

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 11790
  • Gender: Male
    • my list
Re: AKG CK93 Active Setup Issue
« Reply #1 on: June 29, 2010, 08:54:34 PM »
not sure if anyone here works on it but Ricard Land at akg usa would I'm sure.

http://www.akgmicrepair.com/

Microtech Gefell M20 or M21 > Nbob actives > Naiant PFA > Sound Devices MixPre-6 II @ 32/48

https://archive.org/details/fav-gordonlw

https://archive.org/details/teamdirtysouth

Offline illconditioned

  • Trade Count: (9)
  • Needs to get out more...
  • *****
  • Posts: 2997
Re: AKG CK93 Active Setup Issue
« Reply #2 on: June 29, 2010, 09:04:54 PM »
Try Chris Church on this board.

I've worked with those capsules, too, but I'm not looking to work on anyone elses...

  Richard
Please DO NOT mail me with tech questions.  I will try to answer in the forums when I get a chance.  Thanks.

Sample recordings at: http://www.soundmann.com.

 

RSS | Mobile
Page created in 0.052 seconds with 28 queries.
© 2002-2024 Taperssection.com
Powered by SMF