Become a Site Supporter and Never see Ads again!

Author Topic: Rode NT5's vs. Studio Projects C4's???  (Read 9608 times)

0 Members and 1 Guest are viewing this topic.

Offline Cheesecadet

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 3017
  • Gender: Male
  • http://db.etree.org/cheesecadet
Rode NT5's vs. Studio Projects C4's???
« on: June 28, 2007, 06:02:48 PM »
Anyone have any opinions between these two mics?  Which one is better?  I have C4s now but was thinking of moving to something a bit better without breaking the bank and I came across a matched pair of NT5's for $300...so I am wondering the if the NT5's would be an upgrade or just a lateral change?

Any info is greatly appreciated!  ;D

Ryan in CA
AKG 481's, DPA 4061's (Matched), AT ES933's w/ AT853-ELE's (SC/C/O), ECM-19B's, MixPre-3, A10, M10 x 2, Hi Ho Silvers, Various Darktrain & GAKables

Vinyl:
Fluance RT83 Reference > MCS 3230 Receiver > Realistic MC-500's (NOS)

Upcoming:
05/04 Harry Mack (?)
05/10 Adam Bodine Quartet
06/07 Bill Frisell Trio
06/08 Common
06/19 Sensational Barnes Brothers
06/20 Adam Bodine Quintet
07/19 Chali 2na & Cut Chemist
07/30 Tomorrows Bad Seeds

Offline Javier Cinakowski

  • !! Downhill From Here !!
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 4325
  • Gender: Male
Re: Rode NT5's vs. Studio Projects C4's???
« Reply #1 on: June 28, 2007, 07:30:01 PM »
Rode NT5's will not make better tapes.   They sound great up-close, as a pair of drum overheads etc....  They sound like shit from the taperssection.

You will have to spen a good bit more to make an improvement over the the C4's....
Neumann KM185mp OR DPA ST2015-> Grace Design Lunatec V2-> Tascam DR-100mkIII

Offline Cheesecadet

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 3017
  • Gender: Male
  • http://db.etree.org/cheesecadet
Re: Rode NT5's vs. Studio Projects C4's???
« Reply #2 on: June 28, 2007, 07:37:29 PM »
Thanks for the response!  I have a little bit of moolah right now and thought i might upgrade...but It is pretty hard to beat the C4's for anything around their pricepoint.

Thanks...

Ryan in CA
AKG 481's, DPA 4061's (Matched), AT ES933's w/ AT853-ELE's (SC/C/O), ECM-19B's, MixPre-3, A10, M10 x 2, Hi Ho Silvers, Various Darktrain & GAKables

Vinyl:
Fluance RT83 Reference > MCS 3230 Receiver > Realistic MC-500's (NOS)

Upcoming:
05/04 Harry Mack (?)
05/10 Adam Bodine Quartet
06/07 Bill Frisell Trio
06/08 Common
06/19 Sensational Barnes Brothers
06/20 Adam Bodine Quintet
07/19 Chali 2na & Cut Chemist
07/30 Tomorrows Bad Seeds

Offline SmokinJoe

  • Trade Count: (63)
  • Needs to get out more...
  • *****
  • Posts: 4210
  • Gender: Male
  • "75 and sunny"... life is so much simpler.
    • uploads to archive.org
Re: Rode NT5's vs. Studio Projects C4's???
« Reply #3 on: June 30, 2007, 08:12:06 AM »
A rode NT4 mic is (I believe) a pair of NT5 capsules mounted in a fixed XY position.  My friend has an NT4 and it sounds good.  Each person's ears are different... you may like the sound of the Rodes.  I have a tape I made with my Naks, and of the same show made with expensive european mics, and to my ears, I like my source better. "Better" is a matter of taste.

You best friend is your own ears and the LMA:
http://www.archive.org/search.php?query=rode%20nt5
http://www.archive.org/search.php?query=SP%20c4

I would say if you are happy with what you are pulling with the C4's stick with them.  If you aren't happy or you just want to try something else try them.
Mics: Schoeps MK4 & CMC5's / Gefell M200's & M210's / ADK-TL / DPA4061's
Pres: V3 / ST9100
Decks: Oade Concert Mod R4Pro / R09 / R05
Photo: Nikon D700's, 2.8 Zooms, and Zeiss primes
Playback: Raspberry Pi > Modi2 Uber > Magni2 > HD650

Offline Shawn

  • is old and tired
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 3250
  • Gender: Male
Re: Rode NT5's vs. Studio Projects C4's???
« Reply #4 on: June 30, 2007, 10:13:25 AM »
If I was looking to move up from C4's, I'd be giving the beyer MC930's a very hard look at $765/pair. Disclaimer: I've run c4's but not mc930's.

QFT... or AKG 460's which can be had used for ~$600

Offline Alan Hyatt

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 17
  • Gender: Male
  • Gear Designer
Re: Rode NT5's vs. Studio Projects C4's???
« Reply #5 on: July 05, 2007, 08:00:46 PM »
The new sets of Hyper-Cardioid capsules have come into our warehouse. Not pushing them on anyone, but letting you know
that more flexibility for the C4's are available with these new capsules...Available in matched pairs....

Alan Hyatt
PMI Audio Group
Alan Hyatt
PMI Audio Group
Studio Projects, Joemeek, Toft Audio, Valley People
1845 W. 169th Street
Gardena,  CA  90247
tel: 310.323.9050
email: alan@pmiaudio.com
www.pmiaudio.com

Offline bgalizio

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 3555
  • Gender: Male
    • http://www.archive.org/bookmarks/spyboychoir
Re: Rode NT5's vs. Studio Projects C4's???
« Reply #6 on: July 05, 2007, 08:03:33 PM »
If I was looking to move up from C4's, I'd be giving the beyer MC930's a very hard look at $765/pair. Disclaimer: I've run c4's but not mc930's.

QFT... or AKG 460's which can be had used for ~$600

And the Peluso CEMC6's. Between those 3 mics, you should find a nice upgrade to your ears.

The new sets of Hyper-Cardioid capsules have come into our warehouse. Not pushing them on anyone, but letting you know
that more flexibility for the C4's are available with these new capsules...Available in matched pairs....

Alan Hyatt
PMI Audio Group

The elusive hypers have appeared!

Offline JiB97

  • Trade Count: (12)
  • Needs to get out more...
  • *****
  • Posts: 2613
  • Gender: Male
    • My Archive Bookmarks
Re: Rode NT5's vs. Studio Projects C4's???
« Reply #7 on: July 06, 2007, 08:03:10 AM »
If I was looking to move up from C4's, I'd be giving the beyer MC930's a very hard look at $765/pair. Disclaimer: I've run c4's but not mc930's.

QFT... or AKG 460's which can be had used for ~$600

I'll second that as this is the path I have taken so far.  C4s -> AKG 460s.  Gotta love that transformer sound!
AKG ck3/ck8 | c460b  + Naiant Actives | PFAs
Audio Technica u853r (omnis/mini-guns)
Tascam DR-70D

My Archive Links

zowie

  • Guest
  • Trade Count: (0)
Re: Rode NT5's vs. Studio Projects C4's???
« Reply #8 on: July 11, 2007, 06:11:58 PM »
I don't know the C4, but I had an NT4.  Using it in my home studio, I thought it was an outstanding mic for the money, especially flattering to my voice.
Using it from out in the audience . . . . eh, not so hot, at least not without hitting the eq. in post.

Offline NOLAfishwater

  • is not taping much these days
  • Trade Count: (72)
  • Needs to get out more...
  • *****
  • Posts: 6344
  • Gender: Male
  • I LIKE FISHIN
Re: Rode NT5's vs. Studio Projects C4's???
« Reply #9 on: July 15, 2007, 10:59:31 AM »
I have a pair of NT5's and have been really happy with them. They are very detailed and I have pulled some good recordings from the TS in the XY configuration. They have a different sound from my AKG's and that is why I keep them around. For the money, they are tough to beat. What don't you like about your C4's? Have you tested the NT5's yet?

Offline rdflash

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3460
  • I am the Mike Jordan of Recordin'
Re: Rode NT5's vs. Studio Projects C4's???
« Reply #10 on: July 24, 2007, 10:57:47 PM »
The new sets of Hyper-Cardioid capsules have come into our warehouse. Not pushing them on anyone, but letting you know
that more flexibility for the C4's are available with these new capsules...Available in matched pairs....

Alan Hyatt
PMI Audio Group

Link and Price?
Ted Kennedy has killed more people with his car, than I have with a gun.

Offline Charlie Miller

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 2170
  • Gender: Male
  • Come On, Get Happy
Re: Rode NT5's vs. Studio Projects C4's???
« Reply #11 on: July 29, 2007, 07:49:34 PM »
Rode NT5's will not make better tapes.   They sound great up-close, as a pair of drum overheads etc....  They sound like shit from the taperssection.

You will have to spen a good bit more to make an improvement over the the C4's....

I use the NT5's as overheads. Wouldn't put them anywhere else.
Audio Engineer & Archivist for Steve Kimock Productions

Schoeps CMC6/MK4, AKG 460/CK61, AKG C34
Sound Devices 744T
Dante Multitrack Rig

Offline goodcooker

  • Trade Count: (43)
  • Needs to get out more...
  • *****
  • Posts: 4678
  • Gender: Male
  • goes to 11
Re: Rode NT5's vs. Studio Projects C4's???
« Reply #12 on: July 29, 2007, 08:42:47 PM »
If I was looking to move up from C4's, I'd be giving the beyer MC930's a very hard look at $765/pair. Disclaimer: I've run c4's but not mc930's.

QFT... or AKG 460's which can be had used for ~$600

And the Peluso CEMC6's. Between those 3 mics, you should find a nice upgrade to your ears.

Quote

I went from c4s (which I still have) to Peluso cemc6s and the difference is astounding. The Pelusos can be had brand new with all the bells and whistles for less than 700 a pair ( I got mine with cards and hypers used for 550) and they are a huge jump in quality from the c4s but not a huge jump in price. I'll prob keep the c4s for omnis and get subcards for the Pelusos.
I have also heard great tapes pulled with the Beyers although I have never run them.
Line Audio CM3/OM1 || MBHO KA500 hyper>PFA|| ADK A51 type IV || AKG C522XY
Oade Warm Mod and Presence+ Mod UA5s || Aerco MP2(needs help) || Neve Portico 5012 || Apogee MMP
SD Mixpre6 || Oade Concert Mod DR100mkii

pocket sized - CA11 cards > SP SB10 > Sony PCM A10

http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

Offline Alan Hyatt

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 17
  • Gender: Male
  • Gear Designer
Re: Rode NT5's vs. Studio Projects C4's???
« Reply #13 on: August 02, 2007, 03:30:09 AM »
The new sets of Hyper-Cardioid capsules have come into our warehouse. Not pushing them on anyone, but letting you know
that more flexibility for the C4's are available with these new capsules...Available in matched pairs....

Alan Hyatt
PMI Audio Group

Link and Price?

The new SP site is delayed, so no link yet...I think about $100.00 for the matched pair of Hypers...
Alan Hyatt
PMI Audio Group
Studio Projects, Joemeek, Toft Audio, Valley People
1845 W. 169th Street
Gardena,  CA  90247
tel: 310.323.9050
email: alan@pmiaudio.com
www.pmiaudio.com

Offline rdflash

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3460
  • I am the Mike Jordan of Recordin'
Re: Rode NT5's vs. Studio Projects C4's???
« Reply #14 on: August 02, 2007, 06:07:54 AM »
The new sets of Hyper-Cardioid capsules have come into our warehouse. Not pushing them on anyone, but letting you know
that more flexibility for the C4's are available with these new capsules...Available in matched pairs....

Alan Hyatt
PMI Audio Group

Link and Price?

The new SP site is delayed, so no link yet...I think about $100.00 for the matched pair of Hypers...

Thanks for the response Alan :)

I have been searching the PMI and Studio Project sites and was beginning to think I was missing something, but I guess not...lol
Ted Kennedy has killed more people with his car, than I have with a gun.

 

RSS | Mobile
Page created in 0.08 seconds with 39 queries.
© 2002-2024 Taperssection.com
Powered by SMF