Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: BCostigan on February 04, 2004, 10:25:14 PM
-
Anyone know if an oade pre (m118) will pass phantom voltage? I'm guessing if oade could change it from 18 to 48 it would be expensive?
I was thinking TL->118->ua-5 (hoping to use 48v phantom from the ua-5 as well as the a/d)
Seems the price on 148s is much higher than a 118 I see is still for sale.
-
Doug can mod the m118 to provide 48v, however not sure it can pass 48v from another source, probably not though if it is providing 18v already.
A cheaper (perhaps, don't know what doug would charge) option could be ADK>ps1>m118>ua5, but would kinda be a pain in the ass IMO . . .
-
can the TL's run off 18v? I believe the mbhos and schoeps cmc6, at least, can run off 18. I know the dpas require 48, not sure about neumanns, gefells, etc.
-
TL's require 48v
-
can the TL's run off 18v? I believe the mbhos and schoeps cmc6, at least, can run off 18
So can akg 460's, but not 480's. :)
-
if I had mbhos or schoeps, I'd get the thing myself, I'd love to have another 20 db of gain, on demand, like a supercharger!! Someone gotta pick this thing up!
-
if I had mbhos or schoeps, I'd get the thing myself, I'd love to have another 20 db of gain, on demand, like a supercharger!! Someone gotta pick this thing up!
Done :)
-
if I had mbhos or schoeps, I'd get the thing myself, I'd love to have another 20 db of gain, on demand, like a supercharger!! Someone gotta pick this thing up!
Done :)
did you buy it????
don'y you have an m148?
-
I did get it and am dreaming of 4 mic mixes . . . For that price I couldn't pass it up
-
good for you! Chris and Darrin are both buddies of mine... Chris is DeSmet alum too
-
Yeah he seemed like a really nice guy, guess I won't hold his alma mater against him ;)
I kid, I kid . . .
-
what other mics do you have?
[mk4>m148>v3 + ? >m148] > sd744t????
-
A pair of ADK's
-
nice, you gonna get the 4 channel sounddevices box? gonna let me borrow it sometime? :P
-
Not sure if I'm gonna do the 744 or get their 4 chan. mixer>V3>722. If they allow the use of dig and analog inputs at the same time, then def the 744, but if only one or the other it might be a different story.
-
Not sure if I'm gonna do the 744 or get their 4 chan. mixer>V3>722. If they allow the use of dig and analog inputs at the same time, then def the 744, but if only one or the other it might be a different story.
dilemma would be if one could sync the 2 digital audio together,since it might be a probability that the sd box ad converter has a delay/speed filter etc different from an outboard box.
-
Yeah he seemed like a really nice guy, guess I won't hold his alma mater against him ;)
I kid, I kid . . .
did you go to Ladue?
-
dilemma would be if one could sync the 2 digital audio together,since it might be a probability that the sd box ad converter has a delay/speed filter etc different from an outboard box.
This all depends on clocking. If you're going with 2 different digital inputs, the devices all need to be locked to the same master clock. If that can't be done (example - V3 and MiniMe can't be slaved, to my knowledge), the recorder will have to reclock/resample on the fly to prevent sync issues.
If you can do one analog + one digital, it seems like the SD box could slave to the outboard A/D and record all 4 tracks in sync. This is what my ULN-2 does (and it also has the SRC on the fly, should I desire that).
-
Yeah he seemed like a really nice guy, guess I won't hold his alma mater against him ;)
I kid, I kid . . .
did you go to Ladue?
John Burroughs