Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: redbook on October 18, 2005, 07:07:27 AM
-
Hi there,
I recently bought an AD20 from gloco in the Yard (+t again to him for the perfect transaction!), and when the unit arrived to me noticed there is not a standard one.
First of all, it does have some gorgeous knobs which are much better than the original ones:
(http://img92.imageshack.us/img92/2989/dsc036429xf.jpg)
In the other side, it does have an additional mini xlr 3 pin plug.
(http://img92.imageshack.us/img92/2411/dsc036431tr.jpg)
I asked George about this and he doesn't know what's exactly this.
Any ideas about what could be this used for? If it was an input for mini xlr plugs, should this have to be 2 inputs (for full stereo sound?) ??? ???
-
while I'm not really sure, I'll take a guess, and at least throw out another possibilty. When I had my AD-20, I had it modded with a third digital output. I had a regular RCA jack installed on the opposite side of the controls (where your mini-XLR jack is), so I could just plug in a regular S/PDIF cable without an adapter.
Perhaps your mini-XLR is an additional S/PDIF output or even an AES output. if you have a cable, it shouldn't be too hard to test that theory. just connect it to a recording device with a digital input and see if it records :)
-
yes... this is a core-sound digital output mod. Mine came with a min-xlr to sony 7pin cable.
-
interesting... already thought about that but as I don't have a mini xlr cable couldn't test.
So if this is a core mod for optical out, an since I'm only using this with my JB3, I would consider the mod useless for me right?
-
interesting... already thought about that but as I don't have a mini xlr cable couldn't test.
So if this is a core mod for optical out, an since I'm only using this with my JB3, I would consider the mod useless for me right?
pretty much unless you wanted to offer out a coax/SPIDIF patch to someone else
-
Anyone know how to get these after-market knobs? Man, what an improvement over the little stumps there now!
-
Anyone know how to get these after-market knobs? Man, what an improvement over the little stumps there now!
RadioShack, 2 for $1.99. They look just like the ones I put on my Nak MX-100
Todd in Buffalo
-
Anyone know how to get these after-market knobs? Man, what an improvement over the little stumps there now!
RadioShack, 2 for $1.99. They look just like the ones I put on my Nak MX-100
Todd in Buffalo
Thanks, headed there now to see If I can pick up a pair.
-
Anyone know how to get these after-market knobs? Man, what an improvement over the little stumps there now!
RadioShack, 2 for $1.99. They look just like the ones I put on my Nak MX-100
Todd in Buffalo
Thanks, headed there now to see If I can pick up a pair.
http://www.radioshack.com/product.asp?catalog%5Fname=CTLG&category%5Fname=CTLG%5F011%5F002%5F010%5F000&product%5Fid=274%2D403
2 for $1.69
p/n 274-403
-
+t for the link. Went to the ratshak nearest me, didn't have it. time to call another to see if they have the item # in stock
-
+t for the link. Went to the ratshak nearest me, didn't have it. time to call another to see if they have the item # in stock
Hit that link above and search local availability and find the closest store to you. ;)
-
Yeah Matin, did that. Problem is, ain't nothin close to where I live! ;D Sooo, with that in mind, I'll catch the one in Murph-town tomorrow on my daily 120 mile commute, lol! My car hates me :P
-
getting back to the AD20 - does it still have an optical out? or is this the only output on the unit? if this is the only digital output couldn't you run the signal into a hosa box and convert it to optical and then use it with the jb3?
-
It is the standard unit PLUS the extra optical out.
So I can run it straight to the JB3 with a optical toslink
-
cool.
-
it is, but in my case, I really appreciate those supersexy knobs oh yeah ;D
-
It is the standard unit PLUS the extra optical out.
So I can run it straight to the JB3 with a optical toslink
FYI - The extra output (the mini-xlr) is not an optical out... it's a coax spdif.
-
How did you guys get the knobs on? I've tried this before, but the knobs were never secured, so they spun and didn't change levels. Which is totally pointless :P
-
i bought those same knobs. never used them for anything, just waitin to scheme something up with them.