Taperssection.com

Gear / Technical Help => Remote Power => Topic started by: terrapinj on February 18, 2006, 01:19:44 PM

Title: mp-2 power adapter pin assignment Help
Post by: terrapinj on February 18, 2006, 01:19:44 PM

going to make a power cable from the mp-2 to a li-ion battery and need help figuring out which wire to solder to what pin on the mp-2 adapter. attached a photo below of the adapter. the mp-2 is tip positive.

thanks!

Title: Re: mp-2 power adapter pin assignment Help
Post by: caymanreview on February 18, 2006, 03:09:12 PM

i also am going to be making one of these cables, i have that part too

Title: Re: mp-2 power adapter pin assignment Help
Post by: Brian Skalinder on February 18, 2006, 03:58:57 PM

Short one is tip, long is ring.  Use a multimeter on its continuity setting to confirm.

Title: Re: mp-2 power adapter pin assignment Help
Post by: terrapinj on February 18, 2006, 04:10:29 PM

Quote from: Brian Skalinder on February 18, 2006, 03:58:57 PM

Short one is tip, long is ring.  Use a multimeter on its continuity setting to confirm.

actually just tested it with a multimeter, Brian is correct - as usual. Postive wire will be attached to the short one, negative to long.

Thanks for verifying Skalinder!