Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: CDWave -> FLAC  (Read 2070 times)

0 Members and 1 Guest are viewing this topic.

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3277
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
CDWave -> FLAC
« on: February 14, 2004, 05:31:36 PM »
Anyone found problems with doing this?  Got a 2 disc NC show that I split into 2 tracks in SoundForge.  Tracked out in CDWave.  If I use the FLAC save function in CDWave am I going to have issues with the sector boundaries at the end of disc 1?

-Kevin
Logged

Offline Joe w.

  • esniper
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5034
  • Gender: Male
  • Turn JB Up
Re:CDWave -> FLAC
« Reply #1 on: February 14, 2004, 11:49:02 PM »
probably so. just save the wavs and run each disc through shntool.
Logged
2016 National Champions
five generations with an unlocked door and a loaded burglar alarm

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3277
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Re:CDWave -> FLAC
« Reply #2 on: February 15, 2004, 03:41:47 PM »
Do sector problems at the end of the last track of a disc matter?

-Kevin
Logged

Offline Nick Graham

  • Amorican
  • Trade Count: (3)
  • Needs to get out more...
  • Posts: 4068
  • Gender: Male
Re:CDWave -> FLAC
« Reply #3 on: February 15, 2004, 03:44:05 PM »
Not really, since there's nothing technically right after the boundary error. However, the first time somebody runs this seed through SHN Tool, and you get an email complaining about it, you'll wish you'd fixed it the first time around.

Just my $.02
Logged
Right now nothing...in the past: Schoeps CMC6, AKG 480, AKG 460, AKG 414, MBHO 603a, Neumann KM100, ADK TL>Schoeps MK4, Schoeps MK2, Schoeps MK41, AKG ck61, AKG ck62, AKG ck63, Neumann AK40, Neumann AK50, MBHO ka200>Lunatec V2, Lunatec V3, Apogee Mini-Me, Oade M148, Oade M248, Sound Devices MP2, Sonosax SXM2>Sony (mod)SBM1, Apogee AD500>D7, D8, D100, M1, R1, R4, R09, iRiver HP120, Microtrack

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3277
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Re:CDWave -> FLAC
« Reply #4 on: February 15, 2004, 03:47:10 PM »
Might be worth emailing the CDWave guy and see if he could add a fix in.  I'll get on that.

-Kevin
Logged

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3277
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Re:CDWave -> FLAC
« Reply #5 on: February 15, 2004, 03:51:16 PM »
Brainfart.  You could always run shntool on the full file before doing the tracking....it would still be nice to not ever have to do it though.

-Kevin
Logged
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.058 seconds with 31 queries.
© 2002-2024 Taperssection.com
Powered by SMF