Become a Site Supporter and Never see Ads again!

Author Topic: I need a custom cable please  (Read 4509 times)

0 Members and 1 Guest are viewing this topic.

Offline adamz

  • Trade Count: (1)
  • Taperssection Newbie
  • *
  • Posts: 45
I need a custom cable please
« on: July 22, 2011, 05:29:48 PM »
It's been a while since I've been at the forum and am in need.
I am using a headphone out signal source to feed a monitor and also the board. There's no other signal outputs avail on the unit.

I need a splitter cable made up with:

 a 1/4" stereo male plug (for the headphone source) that splits as close to the plug as possible to:
 -a 6 foot cable length terminating at an XLR male (for the board)
and
- a 6 foot cable length terminating at a 1/4" male mono (for the monitor)

Split the stereo plug left/right to the XLR or the 1/4" mono, it don't matter as long as each one gets a channel.

Middle of the road quality wise, no cheap ass parts wanted, nor platinum plated needed. Black Canare cable and Neutrik plugs are great.
email me at akg451ck8@yahoo.com.
Thanks
Adam Z

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: I need a custom cable please
« Reply #1 on: July 22, 2011, 08:05:43 PM »
PM Ted Gakitis(sp?) or Darktrain!
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Neilyboy

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 917
  • Gender: Male
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2

Offline darktrain

  • Trade Count: (715)
  • Needs to get out more...
  • *****
  • Posts: 2875
  • Gender: Male
  • Whats next?
Re: I need a custom cable please
« Reply #3 on: August 12, 2011, 05:43:07 PM »
Already done and delivered:)

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: I need a custom cable please
« Reply #4 on: August 13, 2011, 12:32:43 AM »
Already done and delivered:)

Good man Robb :) I LOVE all of my Darktrain cables. In fact, I ONLY run/use your cables, Robb :) They are TOP-NOTCH ;D 8)
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline adamz

  • Trade Count: (1)
  • Taperssection Newbie
  • *
  • Posts: 45
Re: I need a custom cable please
« Reply #5 on: January 04, 2014, 05:17:35 PM »
Great cable, thanks. I never posted here that all is good and awesome.
AZ

 

RSS | Mobile
Page created in 0.07 seconds with 34 queries.
© 2002-2024 Taperssection.com
Powered by SMF