Become a Site Supporter and Never see Ads again!

Author Topic: Split Omnis  (Read 19084 times)

0 Members and 1 Guest are viewing this topic.

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3277
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Re:Split Omnis
« Reply #15 on: May 06, 2004, 07:00:29 PM »
:)

-Kevin

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3277
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Re:Split Omnis
« Reply #16 on: May 06, 2004, 07:02:47 PM »
So basically with omnis you either need good seperation OR a baffle right?  No need for a nerf/jelkin if you have a nice spread(see Britney post in Open Forum).

-Kevin

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re:Split Omnis
« Reply #17 on: May 06, 2004, 07:05:36 PM »
So basically with omnis you either need good seperation OR a baffle right?  No need for a nerf/jelkin if you have a nice spread(see Britney post in Open Forum).

That's my understanding.  Personally, I'd find it easier to rig up a nerf ball than carry 2 stands (or use someone else's), find a spot for both stands, and set up both stands.  That reminds me...gotta build a Jecklin disc for outdoor summer shows!
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32913
  • Gender: Male
Re:Split Omnis
« Reply #18 on: May 06, 2004, 07:07:33 PM »
yep, you've got it...
I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

Offline olyrc

  • Trade Count: (4)
  • Taperssection All-Star
  • ****
  • Posts: 1208
  • Gender: Male
  • I dig music.
    • My tapes on archive.org
Re:Split Omnis
« Reply #19 on: May 06, 2004, 07:09:09 PM »
Nothing wrong with your stand, but to get them any distance apart I would have to have one on another stand.  Think I'm just gonna build a bar myself though with some alligator clips on the ends or something then clamp that to your stand....are we actually in the section?

-Kevin

We're a couple rows FOB.
Sonic Studios DSM-6S/L > PA-24 > TASCAM DR-07

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3277
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Re:Split Omnis
« Reply #20 on: May 06, 2004, 07:16:57 PM »

 Personally, I'd find it easier to rig up a nerf ball than carry 2 stands (or use someone else's), find a spot for both stands, and set up both stands.  That reminds me...gotta build a Jecklin disc for outdoor summer shows!

Well here is my idea.  Gonna hit Lowe's this weekend.  Grab a piece of 1/4-1/2" metal rod.  Throw an adapter in the middle somehow to mount to the stand.  Got an older soldering helper that has alligator clips that will swivel in all directions and mount those to each end...voila!  3' seperation...maybe make it come apart in the middle for ease of carrying around.

-Kevin
« Last Edit: May 06, 2004, 07:24:51 PM by blu666z »

Offline ChrisV

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1371
  • Gender: Male
  • Proud member of team 'Lux!
    • My Taping Webpage
Re:Split Omnis
« Reply #21 on: May 06, 2004, 07:21:42 PM »
I thought Dead was only allowing taping from lawn section?
Could be wrong though, maybe they will have a tapersection setup at Gorge.
http://taping.4t.com
http://db.etree.org/CV
Superlux CM-H8K/C/H/O -> digimod UA-5 -> JB3

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32913
  • Gender: Male
Re:Split Omnis
« Reply #22 on: May 06, 2004, 07:25:10 PM »
very very similar results, but the j-disc really cuts the mud and boom out of omni recordings due to its better isolation.

So much so that I think more people would run omnis indoors if they heard the results!!

I know this is how I should be running at the Fox... omni's sound great down there but I really shouldn't be pushing my luck by running split's.
I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3277
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Re:Split Omnis
« Reply #23 on: May 06, 2004, 07:25:26 PM »
I thought Dead was only allowing taping from lawn section?


That would suck at the Gorge.

-Kevin

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32913
  • Gender: Male
Re:Split Omnis
« Reply #24 on: May 06, 2004, 07:28:42 PM »
FOB with the dead requires a bit of discreteness. Wait until tour starts and some reports come back from the field. Their mood changes with every tour ::)
I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3277
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Re:Split Omnis
« Reply #25 on: May 06, 2004, 07:36:40 PM »
Where is the section at?  Tapers tickets?

-Kevin

Offline olyrc

  • Trade Count: (4)
  • Taperssection All-Star
  • ****
  • Posts: 1208
  • Gender: Male
  • I dig music.
    • My tapes on archive.org
Re:Split Omnis
« Reply #26 on: May 06, 2004, 07:43:48 PM »
FOB with the dead requires a bit of discreteness. Wait until tour starts and some reports come back from the field. Their mood changes with every tour ::)

*Crossing fingers*
Sonic Studios DSM-6S/L > PA-24 > TASCAM DR-07

Offline olyrc

  • Trade Count: (4)
  • Taperssection All-Star
  • ****
  • Posts: 1208
  • Gender: Male
  • I dig music.
    • My tapes on archive.org
Re:Split Omnis
« Reply #27 on: May 06, 2004, 07:46:28 PM »
I thought Dead was only allowing taping from lawn section?
Could be wrong though, maybe they will have a tapersection setup at Gorge.

Chris - are you going too?

-Ryan
Sonic Studios DSM-6S/L > PA-24 > TASCAM DR-07

Offline creekfreak

  • Retired from taping
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8087
  • Gender: Male
  • My Son's School Bus
    • Rochester Groove
Re:Split Omnis
« Reply #28 on: May 06, 2004, 08:11:13 PM »
do they make any hardware that you can use to run 3' or so that doesn't require making it yourself?
It is company policy never to imply ownership in the event of a dildo - We have to use the indefinite article; "A" dildo, never: "YOUR" dildo.
In Tyler we Trust

And isn't sanity really just a one-trick pony anyway? I mean all you get is one trick, rational thinking, but when you're good and crazy, ooh ooh ooh, the sky is the limit!

My Current Rig:2004 Subaru WRX STI, Stage 3, 360hp, 380lb-ft

Offline phishn

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 472
  • Gender: Male
  • I'm a lizard!
Re:Split Omnis
« Reply #29 on: May 06, 2004, 08:14:03 PM »
if you ran a 3 mic mix, 2 omni's split at a large distance and a card in the middle, would the theoretical cone effect dissipate?
AKG391/92/93's-> Hydra Silver XLR's -> UA-5(Oade warm mod) -> Microtrack II,JB3

 

RSS | Mobile
Page created in 0.07 seconds with 39 queries.
© 2002-2024 Taperssection.com
Powered by SMF