Went with the Pat Stand (Photek LS-8122). Sections with closures that tighten via screws sealed the deal for me. Its folded/closed bulk is greater than the Promaster LS-CT, but I think that is balanced by possibly not needing an extension for *most* applications. You can't fly too high, but it seems sturdy.
Measurements from ground to mic bar:
1st de-tent position, where legs are flat and parallel with the ground: ~7 feet
2nd de-tent position with legs in the shaft: 95 1/4" (nearly 8 feet) / with legs extended out of shaft: 105 1/2" or just under 8'10"
3rd de-tent position with legs in the shaft: 104" or 8' 8" / with legs extended out of shaft: 120 1/2" or just a half inch over 10'
3rd de-tent would be the most common position for taping (footprint with a balance of stabilty and mic height) . 20" between the feet with legs in the shaft/ ~32" with legs extended fully. Obviously adjustable depending on how far you want to extend the legs. 2nd de-tent position is SUPER wide, especially with the legs extended.
Stand also de-tents to fully open for gaff taping to seats. However it does not lock beyond 3rd de-tent.