Become a Site Supporter and Never see Ads again!

Author Topic: Transporting and protecting mk4v's in bag  (Read 4611 times)

0 Members and 1 Guest are viewing this topic.

Offline tim in jersey

  • Site Supporter
  • Trade Count: (8)
  • Needs to get out more...
  • *
  • Posts: 3795
  • Gender: Male
Transporting and protecting mk4v's in bag
« on: October 10, 2012, 09:03:25 PM »
Looking for ideas on how to protect my mk4v's attached to active cables whilst in transit.

I know the old drill a notch in a 35mm film canister lid trick for the MK4/41's. But 35mm film cans are too short to house my mk4v's and the collette connector.

I'm travelling with the 4v's via airline for the first time since I purchased them. I usually just throw the stock B5's on when transporting to shows within driving distance.

I plan on taking the rig on the plane as carry-on. I've seen the shit people try to cram in the over head compartments. I think I need something more robust to protect the capsules. I want to leave the rig as assembled as possible to avoid TSA issues.

Right now I'm thinking some pipe insulation like I use on the mic bodies but would prefer a hard shell of some sort.

Any thoughts?

cashandkerouac

  • Guest
  • Trade Count: (0)
Re: Transporting and protecting mk4v's in bag
« Reply #1 on: October 10, 2012, 09:29:35 PM »
a modified pelican case would probably do the trick. 

Offline jbell

  • TDS
  • Trade Count: (149)
  • Needs to get out more...
  • *****
  • Posts: 4572
  • Gender: Male
  • Spreadicated
Mics: DPA ST4011ER & 4018ER | Neumann kk 184 (matched)> Nbob/PFA
Preamps: DPA MMA 6000 | Audioroot Femto
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-20        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: Transporting and protecting mk4v's in bag
« Reply #3 on: October 11, 2012, 10:32:22 AM »
tim, i have always used the caps on my active bar with screens on that and ive never had an issue, especially if ur carrying them on. trust me theyll b FINE!
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline audBall

  • Trade Count: (37)
  • Needs to get out more...
  • Posts: 6479
  • Gender: Male
  • Feel brand new about it
Re: Transporting and protecting mk4v's in bag
« Reply #4 on: October 11, 2012, 10:42:26 AM »
If you'd prefer something a la the film canister method, you could always use some foam-lined PVC pipe or something similar.  PVC would be nice b/c you could cap it and hack it to whatever length you need.  The pelican/otter box method would also work but I'm not too keen on drilling into otherwise watertight boxes.   :P
mg m20.21.23 ■ akg ck61.62.63 »  nbob■naiant
aercomp2 ■ v2∞3 ■ sx-m2d2
d100 ■ pmd661 ■ r44ocm ■ f3

Offline H₂O

  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 5745
  • Gender: Male
Re: Transporting and protecting mk4v's in bag
« Reply #5 on: October 11, 2012, 11:02:23 AM »
I recently took some probiotic pills (the new ones by bayer) and container they came in may work - it's thicker aluminum with a plastic lid and taller then the 35mm canisters.

It may have a slightly smaller diameter though
Music can at the least least explain you and at the most expand you
LMA Recordings

List

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
Re: Transporting and protecting mk4v's in bag
« Reply #6 on: October 11, 2012, 11:05:14 AM »
I always put my gear under the seat for that reason.

I know that doesn't answer your question, but food for thought.
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline fobstl

  • Trade Count: (4)
  • Taperssection All-Star
  • ****
  • Posts: 1629
Re: Transporting and protecting mk4v's in bag
« Reply #7 on: October 11, 2012, 01:00:46 PM »
Traveled recently with my entire rig and had no issues with security either say. Everything taken apart, all capsules in their Schoeps canisters, etc. Security did do a hand check on the way there but that took about 2 minutes. Of course YMMV. 

Offline Fried Chicken Boy

  • Trade Count: (8)
  • Needs to get out more...
  • *****
  • Posts: 3023
Re: Transporting and protecting mk4v's in bag
« Reply #8 on: October 11, 2012, 02:54:48 PM »
The Pelican and Otterbox cases get my vote, unless you really need something that much smaller.  Both of those manufacturers make great, durable cases that can take a lot of abuse and can keep your mics pretty well secured.  Been carrying my mics in them for years and I'm sold on 'em.

Offline H₂O

  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 5745
  • Gender: Male
Re: Transporting and protecting mk4v's in bag
« Reply #9 on: October 11, 2012, 09:59:08 PM »
FWIW - When I used to fly to shows I never had my gear fully ready to run.  The more fragile components where packed away in the bag  (I.e. bodies in wooden box and caps in the viels)
Music can at the least least explain you and at the most expand you
LMA Recordings

List

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: Transporting and protecting mk4v's in bag
« Reply #10 on: October 12, 2012, 09:54:37 PM »
i think its kinda overkill to do that H2O, but we spend BIG BUCKS on our gear and should use whatever we feel the safest with ;) That said, i like my windscreen/DINa KwonBar/Shure a53m method and will probably always use that method in the future :)
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Big Perm

  • Trade Count: (67)
  • Taperssection All-Star
  • ****
  • Posts: 1198
  • Gender: Male
  • Rage, Rest, work a lot, Repeat
Re: Transporting and protecting mk4v's in bag
« Reply #11 on: October 13, 2012, 08:59:52 AM »
I have flown with 4v's many times! the absolute safest way to go is to just keep them in the schoeps plastic containers they came in. Its not that big of a deal to screw them on once you arrive at your destination. Now that being said, I have flown with them still on the active cables because I was lazy and just left them in their windscreens. If you have a nice bag, everything should be protected. Just place it in the overhead bin in a way it cant be moved around. good luck and safe travels
a
Mics: Schoeps mk4v| mk41v | mk22 | mk8 & mk5 (m/s)
         Schoeps m222> nt222dc (x2)
         Schoeps cmc 1k (x2)
         Schoeps vst62iu (x2)
         Schoeps KCY 250/5 IG (x2) Schoeps KC 5g (x2)
         DPA 4015c
Pre’s: Sonosax SX-M2D2
         Aeta PSP-3
         E.A.A. PSP-2
Recorder: Sonosax sx-r4+, SD702, Sony m10

Offline acidjack

  • Site Supporter
  • Trade Count: (37)
  • Needs to get out more...
  • *
  • Posts: 5845
  • Gender: Male
Re: Transporting and protecting mk4v's in bag
« Reply #12 on: October 15, 2012, 10:48:29 AM »
I have flown with 4v's many times! the absolute safest way to go is to just keep them in the schoeps plastic containers they came in. Its not that big of a deal to screw them on once you arrive at your destination. Now that being said, I have flown with them still on the active cables because I was lazy and just left them in their windscreens. If you have a nice bag, everything should be protected. Just place it in the overhead bin in a way it cant be moved around. good luck and safe travels
a

When I traveled with my 41s and 5s down to NC recently, I left everything in my gear bag as normal - with the caps screwed onto the active cables and in their windscreens) and carried it as my carry-on.  I placed it under the seat so I could be sure nothing would get stuffed on top of it.  Certainly, the vials are safer, but unless you're really slinging the bag around and banging it into things, the caps are protected just fine in the windscreens in a padded bag. 
Mics: Schoeps MK4V, MK41V, MK5, MK22> CMC6, KCY 250/5, KC5, NBob; MBHO MBP603/KA200N, AT 3031, DPA 4061 w/ d:vice, Naiant X-X, AT 853c, shotgun, Nak300
Pres/Power: Aerco MP2, tinybox v2  [KCY], CA-UBB
Decks: Sound Devices MixPre 6, Zoom F8, M10, D50

My recordings on nyctaper.com: http://www.nyctaper.com/?tag=acidjack | LMA: http://www.archive.org/bookmarks/acidjack | twitter: http://www.twitter.com/acidjacknyc | Soundcloud: https://soundcloud.com/acidjacknyc

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: Transporting and protecting mk4v's in bag
« Reply #13 on: October 15, 2012, 11:58:04 AM »
acidjack, I couldnt agree anymore!
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

stevetoney

  • Guest
  • Trade Count: (0)
Re: Transporting and protecting mk4v's in bag
« Reply #14 on: October 15, 2012, 04:14:48 PM »
In some respects, storing in the vials isn't safer...just depends on how you store your stuff.  The vials are loose and easer to misplace and/or fall out than if you leave your capsules connected.  It happened to me once I can't remember where or how...I just remember the five or six skipped heartbeats I experienced when I for some lucky reason looked on the ground and saw the vial with one of my capsules.  I think it slipped out of a snorkel that had accidently opened or something like that.  Ever since then, I leave my capsules attached until I get home. 
« Last Edit: October 15, 2012, 04:18:11 PM by tonedeaf »

 

RSS | Mobile
Page created in 0.079 seconds with 40 queries.
© 2002-2024 Taperssection.com
Powered by SMF