Taperssection.com
Gear / Technical Help => Remote Power => Topic started by: Argitoth on January 18, 2008, 04:13:25 PM
-
How can I give my Korg MR-1 extra battey life? Please help! BTW, I have $$$. :laugh:
-
Search is your friend 8)
Look here for the first of a few Korg MR-1 threads
http://taperssection.com/index.php/topic,80529.0.html
Myself and other Korg users have this external battery pack. Powers the MR-1 for 8-9 hours
http://cgi.ebay.co.uk/Qtek-9100-High-Capacity-External-Battery-5400-mAh_W0QQitemZ160077305401QQihZ006QQcategoryZ48674QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
-
nice little battery!
I used a power runner pr2e with excellent results.
-
this thing?: http://laptopsforless.stores.yahoo.net/pr2powrunmod.html
Edit: There's no 5v switch. Do you run it at 4.5 or 6? How long does it last?
edit: this?: http://laptopsforless.stores.yahoo.net/prunbaforpod.html
edit: I'm going to order this thing: http://store.l-f-l.com/cgi-bin/cp-app.cgi?pg=prod&ref=UP220 is that ok? ;D
-
When doing a tech review on MR-1 http://www.sonicstudios.com/mr-1revw.htm#power (http://www.sonicstudios.com/mr-1revw.htm#power) I noted the external input power is 5 volts, just like Microtrack deck, but at over 2-times power.
So I tried the regulated sleds meant for Microtrack, but with exact MR-1 power plug instead of MT miniUSB. Found these sleds also work flawlessly to handle the MR-1 for up to 25 hours continuous running time. Microtrack models shown, and same $ for MR-1 versions on chart at: www.sonicstudios.com/batsys98.htm#chrt (http://www.sonicstudios.com/batsys98.htm#chrt)
While I failed to test this on loaned MR-1, to maybe get 2+ hours suggest really cheap Energizer 'Energi-to-Go' (USB/5-volt versions) found to pack out a lot of 5 volt power on regular alkaline AA only if left connected and working continuously until exhausted.
At that point you're seamlessly back running on the internal MR-1 battery until loading another 2 AA into the Energizer for again maybe another couple of hours.