I received a pair of ATu853 mics from a friend to add the 4.7K resistors to. Apparently these were originally terminated as mini XLR, though I don't know where they were purchased from. Upon cutting away a section of the sleeving and looking at the plug, I'm presented with the following from each capsule:
Shield
Two yellow wires, both going to ground
Two red wires both going to either tip or ring (One of these looks semitransparent for the left channel, but both appear solid on the right)
I want to be sure of what I do, because I was expecting either two or three single wires, each a different colour. Is the mod able to be performed on these 853s in particular? Thanks for any help!