Gear / Technical Help > Cables

1/4 UA-5 > M1

(1/2) > >>

MarkDavidson218:
Hey,
I'm going to get the digi mod sooner or later, but for right now I'm going to have to go 1/4 out of the UA-5 in to the M1. Do they make 1/4 right angle that would then plug in to the M1. Any help would be great!

Thanks,
Mark

MarkDavidson218:
Hey,
I'm going to get the digi mod sooner or later, but for right now I'm going to have to go 1/4 out of the UA-5 in to the M1. Do they make 1/4 right angle that would then plug in to the M1. Or could I make a pair that would work? Any help would be great!

Thanks,
Mark

sexymexi:
i think you'd need to get, or make a cable, if you want both right angles, that wouldn't be too tough.  I just made some right angle speaker cables with 1/4 right angles.  Its easy, you could probably get them at either radio shack, or go to a guitar store, but you could use a cat5 cable, and solder the tip/ground on the 1/4 in peices, and have that terminate into an 1/8 in stereo mini plug.  i don't know how tough the mini plug would be to solder, but if all else fails get an old pair of headphones and hack the end off and use the existing wire in that.  Good luck man, and welcome to ts.com.

Matt

leegeddy:

--- Quote from: MarkDavidson218 on July 10, 2004, 03:13:27 PM ---Hey,
I'm going to get the digi mod sooner or later, but for right now I'm going to have to go 1/4 out of the UA-5 in to the M1. Do they make 1/4 right angle that would then plug in to the M1. Any help would be great!

Thanks,
Mark

--- End quote ---

mark;

i'd be happy to make some custom cables to suit your needs. i've made custom cables for several folks here and nothing's blown up yet....so that's good news so far :)

i mainly use quality cables and terminators like Canare, Mogami, Belden, Neutrik, etc.

pm me if you're interested.

marc

caymanreview:
Marc's cables are sweet, he made me some 1/4" > rca and 1/4" > 1/8" mini cables so i can take patchers with my 410! super sweet cables!

Navigation

[0] Message Index

[#] Next page