Topic: MBHO users: Kwonbar, 20mm or 21mm?

[Kwonfidelity]

Sorry to start another thread, but I need to get feedback and couldn't rely on the other hijacked thread to get that for me...

I need to get a good idea if most of the mbho users out there are using the mbho suspension mount designed for 21mm mics or have gone to other products (IE, shure, schoeps etc).  I'm trying to determine if it will be better to design this bar at the 20mm diameter similar to the schoeps and neumann(so that the a20s mount can be used), or should it be designed for the 21mm diameter which is the same as the preamp and would fit on the stock mbho suspension mount.  Not sure if most people have gone to aftermarket products or are actually using the stock mbho mount.   Seems like a silly question after re-reading it but surely want to get a consensus before going to production on these.

[nic]

20mm...the A20/s mounts are MUCH cheaper and more readily available than the 21mm mounts

[John P]

I use the A20s when running actives and would like to see the 20mm size.
It goes along with the Vark bar users as well.
My 2 bits.

[Kwonfidelity]

Polling is closed.

My hunch was indeed right on.  Especially since the mbho is twice the cost of the A20(s) it makes more sense to make this bar at the 20mm diameter.

Thanks for the input!