« Reply #80 on: May 18, 2009, 05:16:06 PM »
the schematic you posted was only single channel. you just need to 'double' the schematic.
http://www.gcogger.dsl.pipex.com/stuff/at943_3w_bb.gifjust my $0.02 may be wrong but from all other bb plans I have seen its just a matter of mirroring the schematic.
/edit.. see "graemecogger" first post.. 'Obviously this needs to be duplicated for the 2 channels.'
so if whoever built this for you just built it exactly the the schematic then yes all you will have is mono. you will need to mirror it to get your second channel.
Neil
« Last Edit: May 18, 2009, 05:22:23 PM by Neilyboy »
Logged
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2