Volt, didn't you have someone's ear at Tascam regarding firmware update suggestions?
No being able to select which source to send to the monitor/cam outputs and being stuck with a mix is beyond ridiculous. Worked just fine on the 60; why they would limit this on the 70 is beyond me. I went to the 70 for the 4 channel XLRs, but only being able to get the mix to cam out is really starting to piss me off, and I'm sure it is with a lot of other people too. Recorded Unknown Hinson Friday night using two sets of cards; individually, both sources sound great but the mix that got sent to the camera sounds like ass.
Hmm, weird! I kinda had a similar incident recently! I just taped Dumpstaphunk/Turkuaz last weekend[8.6.16], and separately, my two sources sound great [mk4>vms02ib>70d[3/4] & mk41>pfa>70d[1/2]. But matrixed together 50/50, the mix sounded like ass IMO[just opening as an Audio Montage in WaveLab v6.11 like Ive done a million times before], so I scraped mixing the two sources together and left them separate!
BUT, I am not sure if it's because my mics weren't aligned vertically to the sound source[probably phasing issues from that], or because the 70D has a delay or phasing issue somewhere? I have everything set fine in the settings, but it seems when I mix my 2 DAUD sources from the 70D, they have that same weird phasing/cancellation issue it seems? And its not WaveLab v6.11 doing it!
I just got that new SRS Dina/DIN combo mount, which keeps all 4 of my caps aligned vertically to the sound source, so I'll definitely report back once I tape something new and try to matrix those 2 sources together! I'm HOPING that its just the phasing issues because of running one of my rigs about 4"-5" farther back from the front rig on my Vark Bar, and NOT the 70D reversing phase or something
I'm going to re-check my settings too, but I know for a fact that I don't have phase/delay/limiter/etc ON. That stuff is ALWAYS OFF in my settings!