Become a Site Supporter and Never see Ads again!

Author Topic: SP-CMC-2 > SP-SPSB-1 Anybody run this setup?  (Read 2764 times)

0 Members and 1 Guest are viewing this topic.

spreadheadtom

  • Guest
  • Trade Count: (0)
SP-CMC-2 > SP-SPSB-1 Anybody run this setup?
« on: May 20, 2004, 04:04:00 PM »
just want to ask some questions

Offline Sean Gallemore

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 8316
Re:SP-CMC-2 > SP-SPSB-1 Anybody run this setup?
« Reply #1 on: May 20, 2004, 04:11:22 PM »
i ran it for a couple shows

spreadheadtom

  • Guest
  • Trade Count: (0)
Re:SP-CMC-2 > SP-SPSB-1 Anybody run this setup?
« Reply #2 on: May 20, 2004, 04:16:12 PM »
will be getting the battery box in a few days and will be taping from the 3rd row john prine show---plan on using the d8--do i need to run line in?  any suggestions on settings for the box...

sorry to be stoopid

thanx!
 Tommy

Offline Sean Gallemore

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 8316
Re:SP-CMC-2 > SP-SPSB-1 Anybody run this setup?
« Reply #3 on: May 20, 2004, 04:20:57 PM »
don't be sorry

yes, line-in is good.  Does the Battery box have roll-off?  If it does, set it between 69-95 htz, but it doesn't matter much going line-in.

stealth or open tapin?

spreadheadtom

  • Guest
  • Trade Count: (0)
Re:SP-CMC-2 > SP-SPSB-1 Anybody run this setup?
« Reply #4 on: May 20, 2004, 04:23:54 PM »
It does have the roll off---stealth show


Offline Sean Gallemore

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 8316
Re:SP-CMC-2 > SP-SPSB-1 Anybody run this setup?
« Reply #5 on: May 20, 2004, 04:25:58 PM »
you know how yer gonna run it all stealth like from 3rd row?

spreadheadtom

  • Guest
  • Trade Count: (0)
Re:SP-CMC-2 > SP-SPSB-1 Anybody run this setup?
« Reply #6 on: May 20, 2004, 04:27:00 PM »
no idea.....any suggestions?

Offline Sean Gallemore

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 8316
Re:SP-CMC-2 > SP-SPSB-1 Anybody run this setup?
« Reply #7 on: May 20, 2004, 04:35:14 PM »
here's what I'd do:

D8 in sweater.  Cut tiny whole in sweater to run the cord under the sweater, up your back.  Wear a backwards baseball cap.  Run the caps into the cap up your neck into the sweatband of the baseball cap.  As long as you don't pull on the cable the fabric won't rub on the cap and make any noise.  If the sweater has a hood, you can bunch the hood up to hide the cable.

You can arrange the caps on the side of your head so they are facing forward, or more towards the back like DIN or ORTF.

But there are many other ways

Offline keepongoin

  • Trade Count: (4)
  • Needs to get out more...
  • Posts: 5433
  • Gender: Male
Re:SP-CMC-2 > SP-SPSB-1 Anybody run this setup?
« Reply #8 on: May 20, 2004, 04:38:17 PM »
tommy - thanks for reminding me that i need to run by the hat store today.
“When fascism comes to America, it will be wrapped in the flag and carrying the cross.” Sinclair Lewis: How Fascism Will Come To America (1935)

"Science is facts; just as houses are made of stones, so is science made of facts; but a pile of stones is not a house and a collection of facts is not necessarily science."- Henri Poincare

http://www.archive.org/bookmarks/pierce

spreadheadtom

  • Guest
  • Trade Count: (0)
Re:SP-CMC-2 > SP-SPSB-1 Anybody run this setup?
« Reply #9 on: May 20, 2004, 05:02:12 PM »
Sounds good---only problem is with the sweater---it was 89 degrees here today

+t for the help though

greatly appreciated!!

 

RSS | Mobile
Page created in 0.052 seconds with 34 queries.
© 2002-2024 Taperssection.com
Powered by SMF