Become a Site Supporter and Never see Ads again!

Author Topic: M10 power button is sticky  (Read 2429 times)

0 Members and 1 Guest are viewing this topic.

Offline jbell

  • TDS
  • Trade Count: (149)
  • Needs to get out more...
  • *****
  • Posts: 4571
  • Gender: Male
  • Spreadicated
M10 power button is sticky
« on: October 15, 2013, 07:34:56 PM »
Can I safely use alcohol to clean the power slider on my M10??  It sticks when powering on or off.  TIA
Mics: DPA ST4011ER & 4018ER | Neumann kk 184 (matched)> Nbob/PFA
Preamps: DPA MMA 6000 | Audioroot Femto
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-20        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline LikeASong

  • Trade Count: (11)
  • Taperssection Member
  • ***
  • Posts: 520
  • Gender: Male
    • U2start.com
Re: M10 power button is sticky
« Reply #1 on: October 16, 2013, 05:29:49 AM »
Is it rubber or plastic? I once used alcohol for a similar task (the rubber-ish gain slider of a recorder) and it stopped being sticky when sliding but acquired a very disgusting touch, like it was half dissolved or something. Terrible actually.

If it's plastic I don't think there's a problem.
The worst things in the world are justified by belief.
-U2

After silence, that which comes nearest to expressing the inexpressible is music.
-Aldous Huxley

Offline fmaderjr

  • Trade Count: (16)
  • Taperssection All-Star
  • ****
  • Posts: 1966
Re: M10 power button is sticky
« Reply #2 on: October 19, 2013, 03:16:38 PM »
Probably the best & safest method is to use DeoxIt.

Much more expensive than alcohol, but it's good stuff to have on hand for other uses such as cleaning noisy volume control knobs on stereo receivers, etc.
AT853's (all caps)/CM-300 Franken Naks (CP-1,2,3)/JBMod Nak 700's (CP-701,702) > Tascam DR-680
Or Sonic Studios DSM-6 > M10

Offline jbell

  • TDS
  • Trade Count: (149)
  • Needs to get out more...
  • *****
  • Posts: 4571
  • Gender: Male
  • Spreadicated
Re: M10 power button is sticky
« Reply #3 on: October 19, 2013, 03:25:49 PM »
Thanks I'll grab some!!  I was thinking alcohol would be an easier option, but I don't want to damage the recorder.

Probably the best & safest method is to use DeoxIt.

Much more expensive than alcohol, but it's good stuff to have on hand for other uses such as cleaning noisy volume control knobs on stereo receivers, etc.
Mics: DPA ST4011ER & 4018ER | Neumann kk 184 (matched)> Nbob/PFA
Preamps: DPA MMA 6000 | Audioroot Femto
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-20        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

 

RSS | Mobile
Page created in 0.058 seconds with 30 queries.
© 2002-2024 Taperssection.com
Powered by SMF