Ok so here is the deal. A couple of weeks ago, when I got home from moe.down, I found out that my firewire connection on the back of my computer is screwed up. One of the pins is bent bad. So I have been using the USB connection to transfer files from my jb3 to my computer. Well lastnight after the mule show, I was transfering the show and the first set worked fine. Then I went to transfer the second set, and it tells me it is not accessible. That has happend to me before, so I unplugged the jb3 from the power cord and the computer and then powered back up and reconnected to the computer. The little symbol on the display of the jb3 showed that the connection had been made to the computer. I opened nomad explorer and then went to the music library and it showed me absolutely nothing in the library. I then disconnected from the computer and verified that on the jb3 the library is completly intact. So when I went to connect back to the computer the jb3 did not recognize the connection and no little icon came up on the display. So I disconnected and reconnected several times I power cycled it several times and just couldn't get it to work. I quit for the night and tried again this morning, and no dice. The jb3 still is not recognizing the connection.
What can I do to try and solve this problem. I can not loose the untransfered sets on jb3...HELP!