Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: dgodwin on February 21, 2005, 01:04:44 AM
-
I accidently recorded a recent show in 32k quality. The problem is that my DIO 2448 has no idea what to do with this signal. Any suggestions? I'm thinking either doing a analog out on the DAT back into the SBM-1 with the correct setting, or trying to see if I can transfer the show digitally to my brand new JB3 and using that as the transfer medium between the DAT and the computer. The problem I forsee, is that there isn't a setting for 32k on the JB3. Any suggestions? Thanks in advance!
-
There isn't any setting for digital in on the JB3...when you select "Optical", the following "Monitor Source" selction is just for "Wav" - no rate is specified or available for selection...
...once you are recording, the display will show the sample rate of the source...
Give it a shot with the JB3 - I wouldn't be suprised if it worked...
-
Thanks for the reply. I have to wait until I get my 7 pin -> optical cable from Fozzy, and I'll try it out. Thanks
-
Thanks for the reply. I have to wait until I get my 7 pin -> optical cable from Fozzy, and I'll try it out. Thanks
It will be in the mail tomorrow @ lunch. Sending it priority so should have it by wed or thurs.