« Reply #16 on: December 31, 2014, 12:40:22 PM »
from Oade.com
If you are new to the HD-P2, it's input selection labeling can be confusing. When the deck is set to line in, that selects the RCA inputs while the setting labeled mic selects the XLR inputs. You record XLR line in by setting the deck to XLR in and the PAD to -20dB. The controls might be more properly labeled with the LINE/MIC switches labeled RCA/XLR and the Left/Right PAD switches labeled MIC/LINE.
I may be incorrect about gain knob at zero but I have read that in some thread on here.
« Last Edit: December 31, 2014, 12:48:07 PM by cobiwan »
Logged
"Without music, life would be a mistake."
Friedrich Nietzsche
Mics:
2 matched pairs of Oktava MK-012 MSP6 with Bill Sitler mod + cardioid, hyper-cardioid, and omni capsules
Church Audio CA-14 omni/UBB
Sonic Studios DSM-6S
Recorders:
Tascam HD-P2, Tascam DR-680, Zoom F-8
Cables:
Gakables XLR, S/PDIF, battery and umbrella, DigiGal AES > S/PDIF, Darktrain hot swap battery
Member of DiGiHoArDeRs