Hi
I've recently moved to recording 4 channels (Mics) on my MP6 and wanted to change to using the knobs to adjust gain and not fade
I also just wanted to record the 4 mic channels and not do a live mix track.
I thought I could do this by changing to the custom mode and changing input to basic
It gave me the gain control but it disarmed all the channels and only recorded the mix channels
What am I doing wrong?
Cheers
Duncan
It sounds like you are perhaps looking at the poly file and thinking it is the mix. And in a way it is a mix, as it is all the mics combined, but you need to separate it using the SD tool (ASIO Driver for MixPre) or something like Soundforge. The reason I say this, is it is hard to not ARM the tracks when you want them armed. You would have noticed there was no lighting around the control knobs. If that was the case then probably you did not arm the tracks, but if you saw lights, the tracks were armed.
To use the channel knobs to adjust your ISO levels, you would select Custom mode and set Record to Advanced and leave Channel set to Basic. When Channel is set to Basic, ISO levels are post channel knob and when Record is set to Advanced, ISOs can be armed. To arm a track, just press in the knob and from the menu press the armed option which will turn red.
You will always see the mix on the screen whether you have it recording or not. The way to turn it off so it does not record is to go into the record menu and then Record L, R sub menu and then choose off.