Taperssection.com

Gear / Technical Help => Cables => Topic started by: cgresq192 on March 17, 2007, 06:23:21 PM

Title: ISO HQ 1/8" to 1/8" Patch Cable (3.5mm to3.5mm mini phone jack cables)
Post by: cgresq192 on March 17, 2007, 06:23:21 PM

Looking for a good patch cable for

1/8" stereo male to 1/8" stereo male 

Going from Preamp>JB3/H120

Looking for a HQ cable and right angle connectors

Something similar to picture, but with right angle connectors.

Length needed is 2 feet

Please PM

Title: Re: ISO HQ 1/8" to 1/8" Patch Cable (3.5mm to3.5mm mini phone jack cables)
Post by: stevetoney on March 20, 2007, 02:36:45 AM

I'm in the process of having someone on this list make me up a few cables and this is one of them...exactly...two 1/8 males with right angles.  If you want his address, PM me and I'll give it to you and you can contact him to see if he'll make one for you.

Title: Re: ISO HQ 1/8" to 1/8" Patch Cable (3.5mm to3.5mm mini phone jack cables)
Post by: Nick's Picks on March 20, 2007, 07:35:52 AM

I can make silver cables w/neutrick RA connectors on them.
PM me if interested.  1m for $50

Title: Re: ISO HQ 1/8" to 1/8" Patch Cable (3.5mm to3.5mm mini phone jack cables)
Post by: joekar on March 20, 2007, 08:49:52 AM

Quote from: raoulduke on March 17, 2007, 08:10:11 PM

here is the cable i use.  cardas make great stuff.  however it's only available in 6" or 12" lengths.
the ebay seller who i bought from (and linked below) has the cheapest prices i've seen for them.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250024597018

(http://i19.ebayimg.com/02/i/07/be/62/5a_1.JPG)

Thats what I use..

jk

Title: Re: ISO HQ 1/8" to 1/8" Patch Cable (3.5mm to3.5mm mini phone jack cables)
Post by: Myco on March 26, 2007, 03:53:28 PM

I don't know about SOund Devices MP-2, but I'm going to be using a Aerco MP-2 into my R-09 and tha manufacturer of the MP-2 recommended using the RCA out to the 1/8". He said the 1/8" is pretty useless on the Aerco MP-2 and it was designed for headphone use. I'm having a 6 inch "Y" cable (2 RCA's > 1/8" miniplug) made to use with my setup. Maybe the SD MP-2 is different than the Aerco though.