Become a Site Supporter and Never see Ads again!

Author Topic: Chain in Jecklin Disk?  (Read 2271 times)

0 Members and 1 Guest are viewing this topic.

Offline phishn

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 472
  • Gender: Male
  • I'm a lizard!
Chain in Jecklin Disk?
« on: May 15, 2004, 10:12:13 PM »
Anyone have any idea what the chain is for on this jecklin disk?  Does it come out?  If not, this thing could cause some nice tinging on a recording if its slightly windy.

http://www.core-sound.com/jecklin.html
« Last Edit: May 15, 2004, 10:12:34 PM by phishn »
AKG391/92/93's-> Hydra Silver XLR's -> UA-5(Oade warm mod) -> Microtrack II,JB3

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re:Chain in Jecklin Disk?
« Reply #1 on: May 16, 2004, 01:39:29 AM »
Anyone have any idea what the chain is for on this jecklin disk?  Does it come out?

Dunno if it comes out, but I believe the chain is for measuring capsule distance from the center of the disc.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline drewloo

  • Friend of Salsa
  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 3060
  • it's recreational
Re:Chain in Jecklin Disk?
« Reply #2 on: May 17, 2004, 10:07:26 PM »
Yeah, that's what I seem to recall reading recentely.

http://www.josephson.com/tn5.html

C. The Jecklin disc in practice
II. Operating instructions
1. General
The disc has two microphone mounts (21mm) and one stand connecting piece. By putting the stand connecting piece into the individual borings, the setting angle of the disc can be adjusted to any situation. The measuring cord located in the center of the disc serves for the adjustment of the microphones on the disc. The measuring cord can be adjusted on both sides.

2. Mounting of the microphones onto the Jecklin disc
The microphones are pushed from the rear through the holding clamps of the "Jecklin disc". Take care that the microphone capsules on both sides are located at a distance of approx 8 cm directly above the disc center. This can be checked by means of the pulled-in measuring cord. In this case, the angles of the microphones are drawn slightly towards the outside.

Offline phishn

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 472
  • Gender: Male
  • I'm a lizard!
Re:Chain in Jecklin Disk?
« Reply #3 on: May 18, 2004, 09:39:58 AM »
I am considering building one but ran across that one in my research.  There are a few options i came across online to build one.  Next hurdle to consider...I want to build an umbrella holder to use with one of these but havent figured out how to do it yet.  It should be clamped to the stand since attaching to the top of the disc would make it way to top heavy.
AKG391/92/93's-> Hydra Silver XLR's -> UA-5(Oade warm mod) -> Microtrack II,JB3

Offline phishn

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 472
  • Gender: Male
  • I'm a lizard!
Re:Chain in Jecklin Disk?
« Reply #4 on: May 18, 2004, 09:42:27 AM »
+T for the info and recommendations
AKG391/92/93's-> Hydra Silver XLR's -> UA-5(Oade warm mod) -> Microtrack II,JB3

Offline phishn

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 472
  • Gender: Male
  • I'm a lizard!
Re:Chain in Jecklin Disk?
« Reply #5 on: May 18, 2004, 09:44:56 AM »
yes..the vertical spinnaker
AKG391/92/93's-> Hydra Silver XLR's -> UA-5(Oade warm mod) -> Microtrack II,JB3

Offline phishn

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 472
  • Gender: Male
  • I'm a lizard!
Re:Chain in Jecklin Disk?
« Reply #6 on: May 18, 2004, 09:49:54 AM »
"varying mic distances produce different effects"

From your experience what are the different effects you have noticed with widening/decreasing angle and cap distances?
AKG391/92/93's-> Hydra Silver XLR's -> UA-5(Oade warm mod) -> Microtrack II,JB3

 

RSS | Mobile
Page created in 0.076 seconds with 31 queries.
© 2002-2024 Taperssection.com
Powered by SMF