Become a Site Supporter and Never see Ads again!

Author Topic: dpa miniatures  (Read 3049 times)

0 Members and 1 Guest are viewing this topic.

Offline georgedk

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 11
dpa miniatures
« on: May 19, 2004, 07:12:35 AM »
anyone own a pair of dpa 4061s?  and if so share how you've used this mic.

Offline Craig T

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 4312
    • LMA
Re:dpa miniatures
« Reply #1 on: May 19, 2004, 09:43:51 AM »
above my ears clipped to hat, pinned to shoulders, attached to 18" T-bar on a stand, taped to a column, taped to wall, spaced and hung from balcony... I'm sure I'm forgetting a few.
Schoeps cmc6/4v / Beyer mc950 / Line Audio CM3, OM1 / ADK A51 / Church Audio CA-14
Naiant Tinybox v2.2 / NBox(P) / Church Audio ST9200 / CA-UGLY
Sony PCM-M10 / Zoom F3 / Zoom F6

Offline jnorman

  • Trade Count: (3)
  • Taperssection Regular
  • **
  • Posts: 157
  • I'm a llama!
Re:dpa miniatures
« Reply #2 on: May 19, 2004, 10:48:09 AM »
i have a pair of dpa 4061s for sale right now so i can buy a pair of DPA 4006s.  the 4061s have been modified for stand mounting by bruce myers at DPA in colorado.  using these little guys is what convinced me to put down the big money for the 4006s - they are really nice mics, especially for the money.  i just used them on a four CD project for a pedal harp player.  let me know if youre interested.

jnorman34

  • Guest
  • Trade Count: (0)
Re:dpa miniatures
« Reply #3 on: May 19, 2004, 08:30:20 PM »
a few people have requested my price on the 4061s.  i paid just over $750 for the mics plus the two microdot>XLR adapters not quite a year ago, and i will take something like $600 OBO.  dont be afraid to make me any offer, as i need to sell them.  thanks for your interest guys.

jnorman34

  • Guest
  • Trade Count: (0)
Re:dpa miniatures
« Reply #4 on: May 19, 2004, 08:38:26 PM »
one other thing to mention - single capsule omni microphones (unlike multi-pattern mics) are true pressure condensers, and thus do not suffer from proximity effects nor loss of bass response in the diffuse field, both of which plague pressure gradient mics (all cardioids and other patterns).  

Offline georgedk

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 11
Re:dpa miniatures
« Reply #5 on: May 20, 2004, 02:55:33 AM »
since the dpa 4061 is an omni how far does it have to be away from another 4061 to avoid phase cancellation?

Offline jnorman

  • Trade Count: (3)
  • Taperssection Regular
  • **
  • Posts: 157
  • I'm a llama!
Re:dpa miniatures
« Reply #6 on: May 20, 2004, 11:06:50 AM »
george - here is a short discussion of that issue - http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&threadm=19990411173004.02595.00002790%40ngol03.aol.com&rnum=8&prev=/groups%3Fhl%3Den%26lr%3D%26ie%3DUTF-8%26q%3Dphase%2Bomni%26btnG%3DSearch%26meta%3Dgroup%253Drec.audio.pro -

i havent had a problem with phase and i have used the 4061s with something like an 8" separation for close micing some instruments, and up to about 2 feet apart for small ensembles.

Offline JAH

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 784
  • The kids they dance, they shake their bones!
Re:dpa miniatures
« Reply #7 on: May 20, 2004, 11:08:14 AM »
since the dpa 4061 is an omni how far does it have to be away from another 4061 to avoid phase cancellation?
Actually the closer the less phase difference, as they would see the same wave front.  Some distance will help with "any" high end  brightness due to the replecation of the ear location. If you go too far you get a hole.

fwiw
jah
Taping, it's a team sport!
km140/150>M148>mme or msbm-1
...yes screwdriver impaired
modified akg 461/2/ck8
iH120...and a slew of dat decks ;-(

Offline Sean Gallemore

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 8316
Re:dpa miniatures
« Reply #8 on: May 20, 2004, 01:07:10 PM »
huh uhu, he said hole

Offline JAH

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 784
  • The kids they dance, they shake their bones!
Re:dpa miniatures
« Reply #9 on: May 20, 2004, 08:25:04 PM »
Taping, it's a team sport!
km140/150>M148>mme or msbm-1
...yes screwdriver impaired
modified akg 461/2/ck8
iH120...and a slew of dat decks ;-(

 

RSS | Mobile
Page created in 0.074 seconds with 34 queries.
© 2002-2024 Taperssection.com
Powered by SMF