Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: phishmarisol on April 06, 2004, 09:20:42 PM
-
Got an AD-20 and trying to figure out what else I need. It has a toslink out and I thought I could get a toslink adapter and an optical cable and be fine. However, I read the JB3 archival info. and it said that I might need a digital signal converter for it to be bit perfect...do I really need something like a c02? It didn't specify if I would or not...just says that some will need one.
-
you will only need a CO2 if you need to convert the coax out of the AD-20 to an optical for your jb3. The AD-20 already has an optical out so there is no need since you are running a jb3 behind it.
-
Nice. Thank you. and +T and all that jazz.
-
One more quick question then.
If the min. gain is right around 16/17 db does that mean that even with the gain turned all the way down it is boosting it by that much? I am assuming it does.
-
If the min. gain is right around 16/17 db does that mean that even with the gain turned all the way down it is boosting it by that much? I am assuming it does.
Yes.