Taperssection.com

Gear / Technical Help => Recording Gear => Topic started by: limered on August 31, 2006, 01:43:23 PM

Title: Here's an unusual one for you : Tascam DA-P1 underside screws
Post by: limered on August 31, 2006, 01:43:23 PM

The Tascam DA-P1 DAT machine that I operate is great, except that I've just realised that after doing a wet head-clean recently I forgot to replace the main screws (bolts) that go into the two recessed holes on the underside of the body and join the casing to the main chassis, and now I've lost them and need another two.
  Would you be able to advise me on what specs these bolts are please.?(length and width ; I'm UK-based but can convert)
 I know the unit won't fall apart, but its a notional thing - those being the main bolts and everything.
 
     Thanks for reading,
                     Ben

Title: Re: Here's an unusual one for you : Tascam DA-P1 undersidde screws
Post by: Brian Skalinder on September 01, 2006, 05:21:02 PM

Pro-Digital (http://www.prodigitalinc.com) might have an answer for you, if no one here does.

Title: Re: Here's an unusual one for you : Tascam DA-P1 undersidde screws
Post by: limered on September 05, 2006, 08:09:36 AM

thanks Brian, will try them.
 Yes, got them!. they are probably the only place that has them.
       
         Ben