Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: hzgone on August 06, 2003, 05:01:21 PM
-
I'm running adk a51-tl>mini-me>c1-mv picturebook. Looking for power to run the mini-me and my mics also wondering what software people are using. right now i have soundforge 6, running on xp home. I have heard that xp home is not the way to go.
Lots of help needed and greatly appreciated
-
Best bet for powering your MMe is an SLA battery. It's awfully easy to make one yourself - search the archives to find out how. FYI, your MMe will power the mics.
-
can't find anywhere in here how to build the SLA battery
-
use either win xp pro or win 2k pro, but stay away from xp home and win me.
-
can't find anywhere in here how to build the SLA battery
Ahem. :P
http://www.taperssection.com/yabbse/index.php?board=14;action=display;threadid=2462 (http://www.taperssection.com/yabbse/index.php?board=14;action=display;threadid=2462)
-
Thanks must have looked past it. I have another question, I must not have the right adaptor for the shure a27m, i also have the AKG KM 235 which i don't see how i can connect my mics.
-
d0 you have shockTmounts?
-
i got it figured out i'm such and idiot i forgot to take out the adaptor in the shock mount
Thanks for all your help
-
the shure a27m uses a 5/8 inch thread, you might need an adaptor depending if you shockmounts use a 3/8 or 1/4 inch threads, ive had these problems wiith the sabras and the bogen t-bars, micsupply has any adaptor you could need for mounting shockmounts to t-bars, t-bars to stands, etc., hope this helps
-
the shure a27m uses a 5/8 inch thread, you might need an adaptor depending if you shockmounts use a 3/8 or 1/4 inch threads, ive had these problems wiith the sabras and the bogen t-bars, micsupply has any adaptor you could need for mounting shockmounts to t-bars, t-bars to stands, etc., hope this helps
+T chris... ;D