Become a Site Supporter and Never see Ads again!

Author Topic: stuck lens  (Read 1979 times)

0 Members and 1 Guest are viewing this topic.

Offline palmettobum

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 228
  • Gender: Male
  • "dirty pull"
stuck lens
« on: March 31, 2008, 05:22:31 PM »
wtf!  Just got home from springfest to discover that my tamron 28-70 zoomer is stuck on the d100.  wont twist at all.  just got quoted $425 for the repair job.  no guarantees on that either.  the body and lens aren't even worth that much individually.  i guess the plus side is that the camera and lens still work just fine.  but i'm still a little frustrated.  any thoughts, suggestions?
audio:  cemc6/ck4 > silver clad > ua5 (wmod) > jb3 > svu1
photo:  d200 > 28-70mm f2.8, 50mm 1.8

Offline Frank in JC

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 310
  • (formerly Frank M, but that guy forgot his pwd)
Re: stuck lens
« Reply #1 on: March 31, 2008, 06:30:18 PM »
Sounds like maybe the release pin won't retract?  I have a feeling it's a real undertaking to get in there and work if you can't go in through the lens mount.  Aside from getting another estimate, it's a good excuse to buy a new camera ;)
Favorite generic quote from Archive.org:
"This recording is SICK--it's almost as good as a soundboard!"

Offline phanophish

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 2128
  • Gender: Male
    • ImageLume Photography
Re: stuck lens
« Reply #2 on: April 01, 2008, 12:21:52 AM »
Bummer.  I'd give everything a good wiggle and try twisting the lens slightly back and forth while pushing the lens release, you might get lucky and get it to come free.  After that, as a last resort you might try tapping on the lens lightly with something like a wooden spoon if you are still desperate to get it lens off.  There is not much to the mechanism that locks the lens in place so a little tap might free it up.  If you do get it apart, inspect it well and make sure there is no dirt or grit that is on the mating surfaces of the lens mounts.
______________________________________________
Audio: MBHO 603/KA200N or AKG C2000B>Edirol R44
http://www.archive.org/bookmarks/phanophish

Photo:  Nikon D300, D200, 35mm f/1.8,  50mm f/1.4, 85mm f/1.8, Nikon 17-55 f/2.8, Sigma 18-50/2.8 Macro, 18-70 f/4.5-5.6, 24-120 f/3.5-5.6 VR, Sigma 10-20 f4-5.6, Nikon 70-200 f/2.8VR, SB-800

Jake: What's this?
Elwood: What?
Jake: This car. This stupid car. Where's the Cadillac? The Caddy? Where's the Caddy?
Elwood: The what?
Jake: The Cadillac we used to have. The Blues Mobile!
Elwood: I traded it.
Jake: You traded the Blues Mobile for this?
Elwood: No. For a microphone.
Jake: A microphone? Okay I can see that.

Offline Chilly Brioschi

  • The fool doth think he is wise, but the wise man knows himself to be a fool.
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 15467
  • Gender: Male
  • Waiting for the next cladogenetic event, or Godot
    • Oceana North America
Re: stuck lens
« Reply #3 on: April 01, 2008, 07:43:42 AM »
I'd try taking it to a camera show, and asking around a bit

(shutterbug & photo.net has show listings)


good luck
"Peace is for everyone"
        - Norah Jones

"Music is the drug that won't kill you"
         - Fran Lebowitz

Offline Sanjay

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 5705
  • Gender: Male
  • www.drivebytruckers.com/tourdiary.html
Re: stuck lens
« Reply #4 on: April 01, 2008, 07:47:31 AM »
I had a similar problem (they said it was loose elements, but that's bullshit) with my tokina 28-70, but my repair cost $190.   Probably more than I should have paid too, but maybe get an estimate from someone else, or the factory.
mics & cameras

 

RSS | Mobile
Page created in 0.057 seconds with 30 queries.
© 2002-2024 Taperssection.com
Powered by SMF